Forums/
Deco
2020-10-23 22:16:56
@JonKong If disconnections keep happening on a single band you can try swapping the main Deco with another to see if that is the culprit. If disconnects continue, I would recommend following up with...
0HELPFULS
Forums/
Wi-Fi Routers
2020-10-23 22:01:54
@DanTheMan827 What the Deco tries to do is recommend a node to connect to where the device will make the decision. For those that do not connect to the closest, the next thing to check would be to...
0HELPFULS
Forums/
Range Extenders
2020-10-23 21:57:14
@JayF-SCL Leave the extenders powered on and reboot the router to see if it may be a potential IP conflict. When the issue happens, check the LED light to see if those indicate it is still connected...
1HELPFULS
Forums/
Powerline Adapters
2020-10-23 21:42:07
@robardin The link rate does not mean what your speeds should be, similar to the link rate on a wireless device. A general rule of thumb is you will look getting 40% of the real-world speed. There is...
0HELPFULS
Forums/
Bug Report
2020-10-23 21:29:09
@mblom It may be best to follow up with support in this case to see if there is an issue with the camera.
0HELPFULS
Forums/
Adapters
2020-10-23 21:24:37
@alexsneedmiller Seems like it could be related to npcap: https://ask.wireshark.org/question/10229/how-can-i-enable-monitor-mode-within-win10-os/ I think you may need to load a Linux distro since the...
0HELPFULS