Forums/
Wi-Fi Routers
2021-02-23 19:01:01
@Zombie55385 Try the following: -Set the application priority to standard (Advanced > QoS > Application Priority) -Set the QoS speed manually to 1000 Mbps for up and down (Advanced > QoS, top of...
0HELPFULS
Forums/
Adapters
2021-02-23 18:46:15
@Zekken Try modifying the DNS server for the network adapter by editing the IPv4 adapter properties to reflect the following: Primary DNS: 8.8.8.8 Secondary DNS: 8.8.4.4 At the same time leave the...
0HELPFULS
Forums/
Deco
2021-02-23 18:39:00
@Nate_Spain If one unit is turning red, move it closer to either of the two Deco units as it may be losing a wireless connection which will turn red. If the entire Deco system is turning red, swap...
0HELPFULS
Forums/
Deco
2021-02-23 18:30:46
@William_Kohut Sounds like you may have a network loop happening when wiring the devices. Here is a helpful article that shows the different topologies you can use:...
0HELPFULS
Forums/
Wi-Fi Routers
2021-02-23 18:11:40
@ewokchief49 Here is an article that shows how to enable smart connect via browser and tether app: https://www.tp-link.com/support/faq/2595/
0HELPFULS
Forums/
Access Points
2021-02-23 18:08:25
@alexbohn If you connect a computer directly to the switch, does that work? If you have not done so, swap the Ethernet cables being used, and ports on the switch.
0HELPFULS