OneMesh using 2 Archer C6
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
I have 2 Archer C6 routers:
1. root router covering the house
2. AP mode in the basement
This setup worked quite OK, but mobile devices won't switch wifi automatically only if they finally loose the poor connection. Upgraded routers the other day and OneMesh is available now, but I can't see my secondary router in the root rooter's onemesh menu. Is there any option to use the 2nd router as a onemesh repeater instead of an AP?
Thx,
fish
p.s.: checked the WDS bridging option as well, but still can't manage to see any onemesh device
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello, sorry that the OneMesh™ router can only be combined with OneMesh™ RE or OneMesh™ PLC to build Mesh networks, two Archer C6 cannot build up a OneMesh™ network.
- Copy Link
- Report Inappropriate Content
Hello @fishmong3r
and everyone who is looking for Onemesh between two routers,
I'm updating here to let you know that there will be a new feature called EasyMesh added to the TP-Link routers and range extenders, which will allow you to build a mesh network between two routers wirelessly.
Please visit the following thread to know more about how EasyMesh will work, leave your comments there if you have further inquiries:
EasyMesh Networking: Build Wireless Backhaul between Routers and Range Extenders
- Copy Link
- Report Inappropriate Content
Hello, sorry that the OneMesh™ router can only be combined with OneMesh™ RE or OneMesh™ PLC to build Mesh networks, two Archer C6 cannot build up a OneMesh™ network.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Solla-topee Let me get this straight. I have two OneMesh compatible devices, but they won't work together. Only option is to buy another piece of hw. That's ridiculous.
I appreciate your answer of course.
- Copy Link
- Report Inappropriate Content
This is a joke, in the "TP-Link OneMesh Devices list" it never says that you can't use two routers. I just bought two archer C6, wired my whole house so that i can have one in each end of the house. And after all of that work I find out that I cant use two routers, this is completely misleading.
I understand that there is a FAQ list somewhere, but if you have a list of compatible devices i expect them to work together, even if it is the same device, or at leat be clear on the fact that it doesnt work.
It's a shame from you tp-link
- Copy Link
- Report Inappropriate Content
Hello,
Sorry for any inconvenience caused. We actually have a FAQ on the official website and you may refer to Q10:
https://www.tp-link.com/support/faq/2690/
There is also an article which will tell you what is OneMesh:
https://www.tp-link.com/onemesh/
Hope this makes sense, good days.
- Copy Link
- Report Inappropriate Content
I have an Archer MR600 in the basement (much concrete), an Archer C6 and two RE300 repeaters. Please provide the option to use the C6 as AP with mesh functionallity. This is not an unlikely use case. In my case I use the MR600 and one RE300 to cover the basement, the C6 to cover one side of the first floor and the second RE300 to cover the other side (ideally connected via Onemesh to the C6).
Or is it possible to connect one RE300 to another via Onemesh so that I can skip the C6? In my case the positioning is topological given. The MR600 has to be in the basement and can not be positioned in the middle of the house.
- Copy Link
- Report Inappropriate Content
The Archer C6 doesn't support building an Onemesh network when working in AP mode, we have explained that in this thread, please have a check:
[Wi-Fi Routers] AP Mode supports Onemesh
However, as you have already asked, you can try to connect the second RE300 to the first in a daisy chain to see if it will work as a workaround. Below is the guide to link them together:
https://www.tp-link.com/support/faq/2507/
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hello @fishmong3r
and everyone who is looking for Onemesh between two routers,
I'm updating here to let you know that there will be a new feature called EasyMesh added to the TP-Link routers and range extenders, which will allow you to build a mesh network between two routers wirelessly.
Please visit the following thread to know more about how EasyMesh will work, leave your comments there if you have further inquiries:
EasyMesh Networking: Build Wireless Backhaul between Routers and Range Extenders
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 10474
Replies: 9
Voters 0
No one has voted for it yet.