If you have experienced an issue of disconnecting or slowness on the 4G Wi-Fi router’s network due to the auto band selection, Please download and install the following beta firmware on the router to manually fix the band.

Please be sure you have read The Beta Test Agreement before proceeding!

Archer MR600(EU) v2	supported via the latest official firmware
Archer MR600(EU)_V1	Archer_MR600(EU)_V1_220818 (Beta firmware)
Archer MR400(EU) V4.2	supported via official firmware
Archer MR400(EU) V4	Archer_MR400(EU)v4_20210408 (Beta firmware)
Archer MR400(EU) V2/V3	LTE_GATEWAY_20200325 (Beta firmware)
Archer MR200(EU) V5.2	supported via official firmware
Archer MR200(EU) V5	ArcherMR200(EU)_V5_211015 (Beta firmware)
Archer MR200(EU)V3/V4	LTE_GATEWAY_20200325 (Beta firmware)
TL-MR6500V(EU)V1	supported via latest official firmware
TL-MR6400(EU) V5.2	supported via latest official firmware
TL-MR6400(EU) V5	TL-MR6400(EU)v5_20201113 (Beta firmware)
TL-MR6400(EU) V3/V4	LTE_GATEWAY_20200325 (Beta firmware)
TL-MR6400(APAC) V3	LTE_GATEWAY_20210129 (Beta firmware)
TL-MR150(EU)V2	TL-MR150(EU)v2_20200930 (Beta firmware)
TL-MR150(EU)V1	LTE_GATEWAY_20210108 (Beta firmware)
TL-MR100(EU)V1	supported via the latest official firmware
M7450(EU) V2	M7450(EU) _V2_20220303 (Beta firmware)
M7650(EU) V1.1	M7650(EU)_V1.1_20220427 (Beta firmware)

Note: For MR600 v1/v2, Please note that not all combinations of the 4G bands are supported in 4G+ mode. Only when the router and the SIM card support the same combinations of 4G band in 4G+ mode, the bands might be aggregated successfully.

Besides the beta firmware, it is also planned to release the official firmware for Band selection. Keep an eye on the official website or router web GUI for the new updates.

If you are not sure about how to select the band manually on the router web interface, check the instructions below:

How to select 4G band manually on the web interface of LTE Gateway Routers?

If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.

304 Reply

amit.myid

LV1

2020-12-09 06:13:24

Posts: 3

Helpful: 10

Solutions: 0

Stories: 0

Registered: 2020-11-28

Re:Manual Band Selection for 4G WiFi Routers

2020-12-09 06:13:24

@Kevin_Z V4 firmware is not there also

Kevin_Z

2020-12-09 07:43:37

Posts: 21259

Helpful: 4562

Solutions: 2508

Stories: 20

Registered: 2018-12-24

Re:Manual Band Selection for 4G WiFi Routers

2020-12-09 07:43:37

@amit.myid

Hi, this is for the MR6400 V4:

Baenz

LV2

2020-12-09 09:45:12 - last edited 2020-12-09 09:48:16

Posts: 46

Helpful: 33

Solutions: 1

Stories: 0

Registered: 2019-12-19

Re:Manual Band Selection for 4G WiFi Routers

2020-12-09 09:45:12 - last edited 2020-12-09 09:48:16

@Kevin_Z

The firmware for MR600(EU)_V1 in your message is version 1.1.9. But I have already installed version 1.2.0, which is from May 2020 (1.2.0 0.9.1 v0001.0 Build 200511 Rel.44954n).

Why does a new firmware version have a lower version number?

Satheskumar

LV2

2020-12-09 10:48:17

Posts: 54

Helpful: 20

Solutions: 1

Stories: 0

Registered: 2020-07-18

Re:Manual Band Selection for 4G WiFi Routers

2020-12-09 10:48:17

@Kevin_Z

Official firmware is abailable for MR600 V1 with band selction ?

Kevin_Z

2020-12-09 11:26:19

Posts: 21259

Helpful: 4562

Solutions: 2508

Stories: 20

Registered: 2018-12-24

Re:Manual Band Selection for 4G WiFi Routers

2020-12-09 11:26:19

@Baenz

Hi, the beta firmware version was provided prior to the latest official one, so this band selection is no included in the official yet.

Alex_Al3x

LV1

2020-12-09 16:13:35

Posts: 7

Helpful: 3

Solutions: 0

Stories: 0

Registered: 2020-07-20

Re:Manual Band Selection for 4G WiFi Routers

2020-12-09 16:13:35

@Kevin_Z

please provide the firmware also for the MR200(EU) v2.1 to be able switch between 4G bands

Kevin_Z

2020-12-10 01:32:12

Posts: 21259

Helpful: 4562

Solutions: 2508

Stories: 20

Registered: 2018-12-24

Re:Manual Band Selection for 4G WiFi Routers

2020-12-10 01:32:12

@Alex_Al3x

I'm afraid we cannot provide you the beta firmware to manually select the band on the MR200(EU) v2.1, sorry.

MarceloAlmeida

LV1

2020-12-11 16:20:31

Posts: 2

Helpful: 2

Solutions: 0

Stories: 0

Registered: 2020-12-01

Re:Manual Band Selection for 4G WiFi Routers

2020-12-11 16:20:31

@Kevin_Z is it possible to have the same feature for TL-MR6400(EU)_V1?

JerryAtrick

LV2

2020-12-12 19:40:39

Posts: 30

Helpful: 13

Solutions: 0

Stories: 0

Registered: 2020-03-23

Re:Manual Band Selection for 4G WiFi Routers

2020-12-12 19:40:39

@Satheskumar

Satheskumar wrote

@Kevin_Z

Official firmware is abailable for MR600 V1 with band selction ?

Band selection settings made in beta firmware should remain set if you then update to release. Been using it that way for a while now. You'll need to revert to beta to change them of course.

This beta fixes the SMS problems so I'll stick with it for now.

#11

Simi

LV1

2020-12-16 00:36:04

Posts: 5

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2020-11-13

Re:Manual Band Selection for 4G WiFi Routers

2020-12-16 00:36:04

@JerryAtrick

Since I upgraded to the new beta the router (MR600) has locked up multiple times in two days, only solved by a reboot, so I've reverted to the old beta firmware. I'm beginning to think it's simply unsalvageable. I wish they'd release a stable firmware with band selection, but I won't get my hopes up.

#13

Kevin_Z

2020-12-08 07:11:08 - last edited a week ago

Posts: 21259

Helpful: 4562

Solutions: 2508

Stories: 20

Registered: 2018-12-24

Information

Helpful: 7

Replies: 307

Solution Manual Band Selection for 4G Wi-Fi Routers and LTE Gateways

Solution Manual Band Selection for 4G Wi-Fi Routers and LTE Gateways

Information

Voters 4

Tags