No Internet on VLAN
Hi, i have a ER707-M2. it is a multi port GIGABIT port Router
Port 1 is pure WAN PORT while the remaining ports are WAN/LAN Ports
I only have 1 WAN and is connected to PORT 1.
my wireless networks are working well, in it is an EAP 650 that is using VLAN 10 addressing.
I created a new VLAN called VLAN 50 and set the dhcp range etc.
I have configured the last port (PORT 6) in my router ( OMADA ER 707-M2) to PVID 50 as shown below.
I assumed that anything that is plugged to PORT 6, will now get the VLAN 50 addresses.
So i plugged in a laptop in this port and indeed it was assigned the VLAN 50 IP Range and Gateway.
BUT no device in VLAN 50 can cannot connect to the internet. My pc cannot ping the gateway as well.
can please point me to any article how to enable this or can anyone be kind enough tell me where to start looking at.
Thank you