Tapo H100 "local only" error
The hub doesn't connect to the internet even when is connected to the WiFi correctly. I can see it on the Router admin page.
I have 120mb fiber connection
Same error as this
https://community.tp-link.com/en/smart-home/forum/topic/664946?replyId=1433190
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Please refer to the suggestions in Case 2 here. Cannot use the Tapo app to control my smart devices
- Copy Link
- Report Inappropriate Content
@Wayne-TP i can use the Tapo app for any other of the 6 Tapo device's I have. It's only the Hub failing to connect.
I'll return it since I just bought it
- Copy Link
- Report Inappropriate Content
What router do you use? Any network extension devices?
You can try to restart both router and the smart hub.
- Copy Link
- Report Inappropriate Content
Lynksys WRT3200
No extensions
Restarted both multiple times and factory reset the hub multiple times too.
I'm a computer engineer and I have the logs from the router... Unless I can get the logs from the device too...
Wayne-TP wrote
What router do you use? Any network extension devices?
You can try to restart both router and the smart hub.
No point on extending the pain. Devices returned.
Thanks for your help Wayne
- Copy Link
- Report Inappropriate Content
Got a new hub and the problem persists
I tried the Network Analyser application to see the network strength and it's good all around the flat
But the hub it's still not able to connect to the internet
Wayne-TP wrote
What router do you use? Any network extension devices?
You can try to restart both router and the smart hub.
- Copy Link
- Report Inappropriate Content
To assist with this issue, your case will be forwarded to the support engineering team through email. Please check your inbox later to confirm.
- Copy Link
- Report Inappropriate Content
Last week I had the exact same problem (couldn't connect to the wi-fi) and after many trials with three different wi-fi I returned the hub.
If a solution has been found, please share it here.
I would like to be able to buy a new H100 and try again (thx Amazon...) and of course I will do all the testing you would ask me to do, if needed.
I already have about ten Tapo devices (power sockets) and they worked flawlessly since the first trial.
I also have a few Shelly devices and again, they too are working with no probs.
Please be sure to sell items that work in every scenario. The time I wasted trying to make it work has a far grater value than the value of the H100...
Thank you.
fabio
- Copy Link
- Report Inappropriate Content
What are the routers you have tried? May i know which ISP (internet service provider) you use?
- Copy Link
- Report Inappropriate Content
FritzBox 7530
Aruba.
But, as I wrote, I have a few Tapo power plugs (P100 and P105) and they connected with no problems.
Can it be that the H100 needed to be updated? If it did, how could I do it before linking to the wi-fi?
I didn't think to try to connected to a wi-fi generated by my phone bypassing the router...: could it be a useful test to do?
Thx.
f.
- Copy Link
- Report Inappropriate Content
Yes the Hotspot would be a useful comparison test if if your sim card service is from another provider. The cause of the remote control failure may lie with the device itself, the router, the ISP, or any connection issue between them.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 199
Replies: 10
Voters 1
