Solution Manual Band Selection for 4G WiFi Routers
If you have experienced an issue of disconnecting or slowness on the 4G Wi-Fi router’s network due to the auto band selection, Please download and install the following beta firmware on the router to manually fix the band.
Please be sure you have read The Beta Test Agreement before proceeding!
Archer MR600(EU) v2 | supported via latest official firmware |
Archer MR600(EU)_V1 | Archer_MR600(EU)_V1_220818 |
Archer MR400(EU) V4.2 | supported via official firmware |
Archer MR400(EU) V4 | Archer_MR400(EU)v4_20210408 |
Archer MR400(EU) V2/V3 | LTE_GATEWAY_20200325 |
Archer MR200(EU) V5.2 | supported via official firmware |
Archer MR200(EU) V5 | |
Archer MR200(EU)V3/V4 | LTE_GATEWAY_20200325 |
TL-MR6500V(EU)V1 | supported via latest official firmware |
TL-MR6400(EU) V5.2 | supported via latest official firmware |
TL-MR6400(EU) V5 | TL-MR6400(EU)v5_20201113 |
TL-MR6400(EU) V3/V4 | LTE_GATEWAY_20200325 |
TL-MR6400(APAC) V3 | LTE_GATEWAY_20210129 |
TL-MR150(EU)V2 | TL-MR150(EU)v2_20200930 |
TL-MR150(EU)V1 | LTE_GATEWAY_20210108 |
TL-MR100(EU)V1 | supported via latest official firmware |
M7450(EU) V2 | M7450(EU) _V2_20220303 |
M7650(EU) V1.1 | M7650(EU)_V1.1_20220427 |
Note: For MR600 v1/v2, Please note that not all combinations of the 4G bands are supported in 4G+ mode. Only when the router and the SIM card support the same combinations of 4G band in 4G+ mode, the bands might be aggregated successfully.
Besides from the beta firmware, it is also planned to release the official firmware for Band selection. Keep an eye on the official website or router web GUI for the new updates.
If you are not sure about how to select the band manually on the router web interface, check the instructions below:
How to select 4G band manually on the web interface of LTE Gateway Routers?