Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@XWEBNetwork Yeah, this pretty rough. Third reset today alone.
- Copy Link
- Report Inappropriate Content
Upgraded our M5's to 1.71, against my better judgement. Already have had to reset the network...3 hours later.
We have 15 x M5's on this net. Was perfectly stable with 1.65.
So what are the cheat codes for ensuring stability? I've seen disabling beam forwarding, fast roaming, enabling device isolation on problematic devices. Possibly changing DNS?
Same symptons as others. App says everything looks like, but devices slow to a crawl or cannot connect to the internet at all. And even though App says things are good, the refresh rate on metrics...well, it almost freezes up entirely. Resetting the main seems to do the trick.
- Copy Link
- Report Inappropriate Content
David-TP wrote
Hi, Thanks for the feedback.
Since you have 4, I would suggest picking one M5 first and downgrading it back to 1.6.5 via firmware recovery, then connecting the smart lock to this M5 and checking whether it helped with the disconnection and battery drain.
If everything went back to normal, we could consider downgrading the rest of them.
Wait for your reply.
Best regards.
Tried the firmware recovery to downgrade from 1.7.1 to 1.6.5 as you suggested but it was failed, as shown above.
Both tftpd64 and solarwinds tftp server failed.
- Copy Link
- Report Inappropriate Content
@TP-Link i just updated a couple of 2021 firmware M5 to 1.6.1 (what was offered) and it wont offer the 1.7.1 update
is there a way to force them to check ?
- Copy Link
- Report Inappropriate Content
@David-TP Before downgrading I tried enabling ECO mode on Deco but set to "Power mode - Normal mode". Since then no more disconnects. Could be some bug while ECO mode is disabled on Deco?
- Copy Link
- Report Inappropriate Content
Hi, Thanks for the feedback.
Since you have 4, I would suggest picking one M5 first and downgrading it back to 1.6.5 via firmware recovery, then connecting the smart lock to this M5 and checking whether it helped with the disconnection and battery drain.
If everything went back to normal, we could consider downgrading the rest of them.
Wait for your reply.
Best regards.
- Copy Link
- Report Inappropriate Content
I'm experiencing constant disconnects and battery drain with Nuki SmartLock 3.0 Pro since updating my M5 network (4 devices total) to 1.7.1. How do I downgrade to my previous flawlessly working 1.6.5?
- Copy Link
- Report Inappropriate Content
@CenterInYou it looks like this update is slowly available via OTA, the best way to update quickly is to download it from TP-Link support and update manually.
- Copy Link
- Report Inappropriate Content
@TP-Link any word of when 1.7.1 will be pushed to update via the app in the the US?
- Copy Link
- Report Inappropriate Content
I was also able to update successfully using available firmware on the French TP-Link support page.
OTA did not show any update.
I still have more disconnection notifications than I had with 1.6, even after disabling IOT network and put back devices to main network.
Even if it is really better since I disabled IOT network, looks like IOT network can cause some trouble.
A bug I have is disconnection of Chromecast with Google TV 4K when enabling IPv6 (bridge mode) but I did not test with previous versions and I'm going to change my ISP so going to test with the next one which might allow me not to use bridge mode but might allow to have a delecated prefix which could be better IMO.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 15
Views: 233294
Replies: 870