Deco M9 and Sonos issues
Hi All
Hoping to solve some strange issues with my home network.
my set up is:
virgin hub 4 in modem mode (not router)
main deco plugged into the virgin hub acting as the router
netgear prosafe 24 port network switch connected to the main deco
after this I have wired cat 6 going to every room in the house.
I have two other m9 decos plugged into ports in other rooms.
I have a Sonos beam which keeps disappearing from the Sonos app and cannot be controlled.
I have a Sonos amp powering in ceiling speakers, which now seems to be playing ball. It took a very long time to set up as the Sonos amp could not be found or it would disappear.
I have sky glass plugged into a second deco directly as it kept losing connection when connected to the switch via the port in the wall.
I have now tried to add a second Sonos amp as I have in ceiling speakers in 6 different rooms and will also use some zp120's.
I connected the second sonos amp directly to the switch in the network cupboard where all speaker cables terminate and it sent everything up the wall. The two peripheral decos stopped working and had a red light. I also could not set up the sonos amp as it could not be found. If I unplug the sonos amp from the switch I can perform an update but then get an error 1101 and cannot connect to the sonos amp.
does anyone how the decos can work with the switch and the sonos?
I have not tried the access point mode and would rather not go down this route as I want to keep some of the functionality.
I also want to use the beam sound bar which keeps disappearing from the Sonos amp.
sorry for the long winded post. I am far from an expert and am really struggling to understand a lot of the other posts on this subject. Any jargon free replies will be most appreciated.
thanks
rob.