Solution 464XLAT Support on TP-Link 4G/5G routers for Jio/EE/Optus/Vodafone and other SIM carriers

This Article Applies to:
TP-Link 4G/5G routers
Background:
With More and more SIM service providers gradually implementing 464XLAT mechanism in their services, after inserting the SIM card into TP-Link 4G/5G routers, some users might report that there is no internet access or certain Apps/websites can't be accessed. When checking the internet status, the router obtains an IPv6 address without an IPv4 address.
Available Solution:
The following beta versions have introduced 464XLAT support. It is suggested to install the specific version and check whether the reported issue can be fixed.
***Before downloading and updating the following beta firmware, please verify the model number and hardware version on the product label, especially the models with x.0, x.20, and x.30 versions. Please note that the x.0, x.20, and x.30 are different versions and are unable to use the same firmware.
Archer NX600(EU)_V2 | Archer_NX600_V2_20250613_Beta |
Archer NX200(EU)_V2 | Archer NX200_V2_20250430_Beta |
Archer NX200(EU)_V1 | Archer NX200_V1_1.6.0_250529_Official |
Archer MR600(EU) V3 | Archer_MR600(EU)_V3_250429_Beta |
Archer MR600(EU) V2 | |
Archer MR600(EU) V1 | Archer_MR600(EU)_V1_20231127_Beta |
Archer MR500(EU) V1 | Archer_MR500(EU)_V1_250605_Beta |
Archer MR400(EU) V4.30 | Archer_MR400(EU)_V4.30_230928_Beta |
Archer MR200(EU) V6 | Archer_MR200(EU)_V6_24040425_Beta |
Archer MR200(EU) V5 | Archer_MR200(EU)_V5_24040425_Beta |
Archer MR200(EU) V5.20 | Archer_MR200(EU)_V5.20_230815_Beta |
Archer MR200(EU) V5.30 | Archer_MR200(EU)_V5.30_230816_Beta |
TL-MR6400(EU) V7 | TL-MR6400(EU)_V7_250515_Beta |
TL-MR6400(EU) V5.30 | TL-MR6400(EU)_V5.30_230801_Beta |
TL-MR6400(EU) V5.20 | TL-MR6400(EU)_V5.20_230815_Beta |
TL-MR6400(EU) V5 | TL-MR6400(EU)_V5_20240425_Beta |
TL-MR100(EU) V2 | TL-MR100(EU)_V2_240313_Beta |
Do let the community know how the beta version works. We are always happy to help.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
#Official #Highlighted Thread #Jio 5G SIM
MR 200 V4
Sunshine wrote
This Article Applies to:
All TP-Link LTE Gateway Routers including Archer MR600, TL-MR6400, etc.
Issue Description/Background:
Some customers reported that their Jio SIM card was working fine before, but the internet stops working after upgrading to 5G, old 4G Jio SIM card still works fine on the same device, while the 5G enabled Jio SIM card works on a smartphone or Jio's own router.
Available Solution
Before downloading and updating the following beta firmware, please verify the model number and hardware version on the product label, especially the models with x.0, x.20 and x.30 versions. Please note that the x.0, x.20 and x.30 are different versions and unable to use the same firmware.
For Archer MR600(EU) V3: Archer_MR600(EU)_V3_230811
For Archer MR600(EU) V2: Archer_MR600(EU)_V2_230801
For TL-MR6400(EU) V5.30: TL-MR6400(EU)_V5.30_230801
For TL-MR6400(EU) V5.20: TL-MR6400(EU)_V5.20_230815
For Archer MR200(EU) V5.30: Archer_MR200(EU)_V5.30_230816
For Archer MR200(EU) V5.20: Archer_MR200(EU)_V5.20_230815
For Archer MR400(EU) V4.30: Archer_MR400(EU)_V4.30_230928
For Archer MR600(EU) V1: Archer_MR600(EU)_V1_Builld_20231127
For Archer MR200(EU) V5: Archer_MR200(EU)_V5_24040425
For Archer MR200(EU) V6: Archer_MR200(EU)_V6_24040425
For TL-MR6400(EU) V5: TL-MR6400(EU)_V5_20240425
For TL-MR100(EU) V2: TL-MR100(EU)_V2_240313
Notes:
1) If there is still no internet or no IPv4 address when using the above beta firmware with Jio 5G SIM card, please check the default APN profile settings on Advanced->Network->Internet page, if the PDP Type is not on "XLAT", please create a new profile manually and set PDP Type as "XLAT", leave other parameters the same as default profile, then check if the problem will be resolved.
If so, please share with us the MCC&MNC of your SIM card, so that we could update the default profile settings for your SIM card.
You could insert the Jio 5G SIM card into your smartphone, then check the APN profile settings on the phone to find the MCC and MNC, please share with us the screenshot, thanks a lot!
2) The beta firmware is for Jio 5G SIM card only, please don't update it if you would like to use a different SIM card.
3) We will update this thread once there is any other beta firmware for other models or versions.
4) Please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding
If internet still doesn't work with 5G Jio SIM after updating the above firmware, please make sure the PDP Type in the APN profile is XLAT, and provide the following information for further follow-up:
1. A screenshot of the Advanced > Status page.
2. A screenshot of the Advanced > Network > Internet page.
3. Save and send us the system log file. You can go to Advanced > System Tools > System Log page to save the log file.
4. Model number, hardware and firmware version of the TP-Link router.
Do let the community know if there is anything else that we can help with. We are always happy to help.
- Copy Link
- Report Inappropriate Content
@Satheskumar The beta firmware for MR600_v1 has already been added in the OP thread.
@BighornDeer Archer NX200_V2 has been added as well.
Best regards.
- Copy Link
- Report Inappropriate Content
Thanks, David. I willl check out the MR600 v1 Beta - hopefully, it still includes the previous manual band selection feature.
URGENT: Still waiting on the NX200 v1 Beta with XLAT support. Any updates?
- Copy Link
- Report Inappropriate Content
@Sunshine Hi please help, I recently updated to beta firmware to use Jio 5G SIM and it worked fine, but now again I downgraded to stable version, but now Airtel and Jio 4G Sim is not working in stable version. Jio 5G Sim still works. Any solutions please?
- Copy Link
- Report Inappropriate Content
@Jeevanm router model ? and why downgraded to stable version ? you go with beta version only as of now if everything works,..
- Copy Link
- Report Inappropriate Content
@Satheskumar my router is TP link MR 600 v2.
I downgrade back to stable version because I noticed few issues in the beta firmware, like I was not able to stream playback in Hikvision DVR away from home and had issues with Wi-Fi calling also, but in stable version everything was working fine.
I have tried factor reset also multiple times in stable firmware now, but still other Sim cards like Airtel, BSNL and Jio 4G SIM doesn't work only the Jio 5G SIM card works now.
- Copy Link
- Report Inappropriate Content
yes probably you are correct, same i have tested with MR600 V2 beta firmware with Airtel, India.. when i try to play Hivision camera in mobile with mobile data(remotely) its not playing all camera, i did not faced such a issues earlier.
@Sunshine @David-TP Kindly help on this issue in beta. also pls see the Router Log. I have cleared the log and while steaming camera i saw this pppo time out error but not sure its usual one.
- Copy Link
- Report Inappropriate Content
updated with latest firmware, seems Airtel india primarly use IPV6 as tested with https://test-ipv6.com.. FYR.
- Copy Link
- Report Inappropriate Content
@Jeevanm Problem solved. I installed beta again and changed to ipv4 and then upgrade to stable again. Now everything is working fine.
- Copy Link
- Report Inappropriate Content
@Sunshine Hi, would it be possible to provide firmware that supports 464XLAT on the NX510v 5G router and NE210 outdoor 5G router?
- Copy Link
- Report Inappropriate Content

Information
Helpful: 49
Views: 125645
Replies: 466
Voters 7






