Official Release Deco Firmware Updates Adding Signal Selection and VPN for Multiple Models
Deco 1.6.0/1.7.0/1.1.0/1.2.0 Firmware Update Added to Select Models!
Over the last few weeks, A New Batch of the Latest Firmware for Deco has been released! This update brings many of the features most requested by the community to reality, including Static Routing, IoT Network, Signal Preference, VPN Server/Client, etc.
Please refer to the Firmware release note for a List of Features Added to Your Model!
| WiFi 5 |
Note: VPN is not supported. |
| Wi-Fi 6 |
|
| Wi-Fi 6E | |
| Wi-Fi 7 |
|
Note:
1. Please make sure your Deco APP is up-to-date.
2. Please be aware that specific features may vary between hardware versions.
3. Some features are not supported under Access Point Mode.
4. If there are other Deco models in the Mesh network, some features would no longer show up, such as Signal Source and Connection Preference; while others only need the support on the main Deco, like VPN, Static Route, MTU, and smart DHCP.
5. As a reminder, the Technical support team does not have any information regarding what models the firmware is being developed for and when we could potentially see a particular release. Please refrain from asking "When Will 'X' Model Receive the Feature?"
Frequently Asked Questions:
1. Why can't I detect the above firmware on the Deco APP?
In the first stage of firmware release, the new firmware would be pushed to a part of users first, then gradually within the next few weeks, if everything goes on well, it will be pushed to all users. During this gap, it is normal if you can not detect the latest firmware. It is suggested to wait for a while or manually update the firmware via web UI per Update the Firmware of Deco.
2. If I have V1.6, which firmware should I use？
Common rules for firmware upgrade: Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8); Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28).
x.6 and x.8 are mainly used to distinguish the place of production.
3. How to downgrade the firmware if I run into any issues?
The newly released firmware feedback is always important and it would be highly appreciated if your could share here what happened to Deco after updating the firmware. We would reply to the post at the earliest time.
In case you have to downgrade the firmware immediately, the cross-platform firmware downgrade, like from 1.2.0 to 1.1.0 needs to be performed via firmware recovery. But if you just want to downgrade from 1.2.6 to 1.2.5 or 1.2.2, it could be done via web UI directly.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Will X20 V1.20 Support VPN?
- Copy Link
- Report Inappropriate Content
Hi, Thanks for the notification. Normally I will check the firmware release system 3-5 times a week and so far, I haven't seen any new firmware for Deco X20/X60 V1/V1.2, Deco M4 V1/V2. If I do, I am sure it would be updated on the community.
Best regards.
- Copy Link
- Report Inappropriate Content
Not compatible con M4 V2 and with other models with previous "V" versions? Is it a joke? After so many years of waiting!?
- Copy Link
- Report Inappropriate Content
@David-TP This is pathetic. M4 v1-v2 are still sold and we are waiting for years for an update now. My m4 in the bedroom stupidly keeps selecting the wrong connection every now and then (just out of the blue) which results in having no internet connection at all.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@David-TP As usual no update for X50-4G. Why release a model such as that when TP-Link doesn't even bother to bring it properly up-to-date with the X50 and the rest?
The last firmware was a minor one – Build 20221201 which was from 2022 Dec. Hugely disappointed with TP-Link.
- Copy Link
- Report Inappropriate Content
@Josi_87 Similarly X50-4G and X20-4G are basically abandoned despite being sold at premium price. Awful practise by TP-Link with its selective model rollout. So unfair for those who have invested into these models.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 31735
Replies: 123
Voters 0
No one has voted for it yet.