C320WS is not giving "Detected Events" list
C320WS is not giving "Detected Events" list
My TAPO C320WS is not showing "Detected Events" list while viewing playback from the Android App. Issue is being faced since last couple of weeks.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
1. Thank you for the updates. On the problematic Tapo C320WS, please go to the camera's Device settings>Storage & Recordings> microSD Card page to format the SD card and check if it helps.
If the problem remains, please refer to the link below to collect the device log and send a private message to me if you have collected the device log.
How to get the log of Tapo Camera
(Note: please go to the camera's Playback page to confirm the problem remains after enabling the Diagnostics option, then try to collect the device log.)
2. What's the model number, capacity, and format of the SD card inserted into the problematic Tapo C320WS?
3. The camera with the Ver2.26 should be the newer one since it has the up-to-date info on the package.
Best Regards
- Copy Link
- Report Inappropriate Content
Not sure if this is relevant in this situation but I just had this very same issue (detected events list missing below the timeline) with my Tapo C310 using the app on an iPhone.
It turns out that in my case the problem appears to be have been caused by my iPhone approaching its storage capacity. As soon as I freed up a couple of gig the detected events list returned.
I just wanted to pop this in the thread in case it can help someone.
Cheers,
MD
- Copy Link
- Report Inappropriate Content
@MungoDragons Thank you very much for your case sharing. 
- Copy Link
- Report Inappropriate Content
Good morning,
I have exactly the same issue as everyone else on a c310 outdoor camera with regards to the playback bar not showing any events, the bar is just blue with no coloured bars showing movement or person detection.
I have update the latest software, unpaired and removed the camera.
Looks a like a know fault affecting multiple users, is there a fix on this yet please?
Regards
Lee
- Copy Link
- Report Inappropriate Content
Hi,
Please help confirm the following information for the reported case.
1. Please check if your phone's storage capacity is enough. If not, try a different phone if you have one.
2. Clean caches on the phone for your Tapo app.
3. Try to remove the SD card from the camera and insert it again, you can try several times and check if it helps.
Best Regards
- Copy Link
- Report Inappropriate Content
Hi @Solla-topee
I've got the same issue with my C310.
Hardware version 1.0
Firmware version 1.3.9
It is the same with iPhone and Pixel 6 - it had been working perfectly until a couple of weeks ago.
- Copy Link
- Report Inappropriate Content
Hi,
You can try to remove the SD card from the camera, back up the needed video recordings on a PC, then connect the SD card back to the camera, format the SD card, and check if it helps.
Best Regards
- Copy Link
- Report Inappropriate Content
For everyone's info, I just experienced the same issue on a C310. There are some other/older threads for "detected events" thumbnails suddenly gone missing while the lines appeared in the timeline view.
As suggested in another thread - simply formatting the SD card from within the app had solved the issue for me.
(I suspect it might be related to the fact that the SD card was full, i have "Loop Recording" on for continuous erase/record, but something must have gone wrong.
TP-link team (Solla-topee, @Wayne-TP) - please note and relay to the tech teams.
- Copy Link
- Report Inappropriate Content
Hi,
Thank you very much for sharing your solution, and I'll forward this information to our tech team for analysis and improve our product.
Best Regards
- Copy Link
- Report Inappropriate Content
Information
Helpful: 6
Views: 3778
Replies: 19
Voters 0
No one has voted for it yet.