TP-Link Community > Tapo Smart Camera > Blurry Images on CAM / Tapo C200
< Tapo Smart Camera

Blurry Images on CAM / Tapo C200

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Blurry Images on CAM / Tapo C200

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Blurry Images on CAM / Tapo C200
Blurry Images on CAM / Tapo C200
2023-10-06 11:12:05 - last edited 2023-10-07 09:33:26
Tags: #Live View
Model: Tapo C200  
Hardware Version: V1
Firmware Version: 1.3.6

Hi, i have a pair of Tapo C200 cams, that came together in a pack. 

 

I only used 1 cam so i kept the spare cam in its original box in a dry and dark room, but i installed the 2nd cam today and the image is totally blurry.

 

I have them both set to the same configurations and set to HQ in the live view page. I have rebooted it several times and gently cleaned the lens in case of any dirt but the image continues very blurry, almost unwatchable. It seems to be displaying in 480p instead of HD.

 

Please advice.

 

Thank you

Fran

 

 

 

 

 

  0      
 
  0      
 
#1
Options
8 Reply
Re:Blurry Images on CAM / Tapo C200
2023-10-07 09:59:12

  @Fran69 

Hi,
Please ensure only your phone is watching the Tapo Cam 2 and disconnect other devices to watch it, then check if the image is clear.

 

Please check if there is anything stuck in front of the lens of Tapo Cam 2, and send me a picture of the camera's lens if possible.

 

Best Regards

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
  0  
  0  
#2
Options
Re:Blurry Images on CAM / Tapo C200
2023-11-20 04:53:03

I am also having same issues. I have two Tapo C200 cameras. Previously it was crystal clear. But now the video quality has gone down. Dont know how to clean also. Help me out in sorting this out. As of now its tsreaming in Zone minder console with high stream settings.  @Fran69 

  0  
  0  
#3
Options
Re:Blurry Images on CAM / Tapo C200
2023-11-20 04:54:22

 Hi dear @Solla-topee ,

 

please help me out as well. I have two Tapo C200 cameras which give really blurry image in high quality settings. This is the quality I am getting. Could you please guide me how to sort it out?

  0  
  0  
#4
Options
Re:Blurry Images on CAM / Tapo C200
2023-11-21 08:57:18

  @Diptanshu 

Hi,
Please check if the camera lens is clean. If the outside of the lens is clean, you can carefully check whether there is mist inside the lens.
Are you watch the camera via the Tapo app? And does the camera work in a dry environment?
Best Regards

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
  0  
  0  
#5
Options
Re:Blurry Images on CAM / Tapo C200
2023-11-21 12:29:36

  @Solla-topee Thanks for your reply. The outside looks clean. I think there is mist inside. Please advise on how to clean the mist. I am using it in Tapo App as well in Zone Minder setup for my workshop.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

.+.

 

+-

+-

--

-

`

  0  
  0  
#6
Options
Re:Blurry Images on CAM / Tapo C200
2023-11-23 10:06:42

  @Diptanshu 

Hi,
We need more information to locate the issue, and I have reported it to the tech team. They will likely reach out to you via email to continue troubleshooting the problem, please check your email box and confirm.
Best Regards

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
  0  
  0  
#7
Options
Re:Blurry Images on CAM / Tapo C200
2024-03-13 09:46:27

  @Fran69 Have been having the same issue with Tapo C200 blurry image. How did you rectify it. Pls. let me know. 

  0  
  0  
#8
Options
Re:Blurry Images on CAM / Tapo C200
2024-03-14 10:12:18

  @RobEmmu 

Hi,
Please help confirm the following information for further analysis.
1. Ensure the camera's lens is clear. 
2. On the Tapo app>camera's Live View page, check if the Video Quality is set to HQ.
3. Disconnect the Tapo C200 from other devices if devices are streaming it via RTSP protocol, make sure only one phone is streaming the camera via the Tapo app.
4. Record a video manually on the camera's live view page, and try to play the video recording on the Tapo app, whether the issue remains.
Best Regards

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
  0  
  0  
#9
Options

Information

Helpful: 0

Views: 3000

Replies: 8

Tags

Live View
Related Articles
 Tapo Cam c200
551 0
TAPO C200
213 0
Cam C200 bricked
463 0
Issues with TAPO C200
183 0
 Tapo C200 in IP Cam Viewer
6019 0
Tapo C320WS Blurry Zoomed In Live View
988 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.