Beta Software Deco M4/S4_V2 Support Connection Preference
This Article applied to
Deco M4_V2_1.5.8
Deco S4_V2_1.5.1
Download Link:
| Deco M4_V2 | Deco M4_V2_1.7.0 ( New version updated on 2024.3.7) |
| Deco S4_V2 | Deco S4_V2_1.6.1_build_20240328 (updated on 2024.4.19) |
1. Please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding.
2. For Deco M4_V2, the firmware downgrade(back to the official 1.5.8 version) needs to be implemented via firmware recovery.
3. For Deco S4_V2, it would revert to the official 1.5.1 directly via web UI.
4. How to update the firmware via web UI.
Firmware Modifications:
| Deco M4_V2_1.7.0 |
|
| Deco S4_V2_1.5.1 |
|
Please feel free to comment below if you have any issues with these two firmware versions!
Related Articles:
Connection Preference: Customize Your Preferred Signal Source
Understand the Differences Among Deco Firmware Platforms
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, have you checked on one more 2.4GHz device?
And what is the model number of this mobile phone?
Please also go to Deco APP>More>Network Optimization and optimize the network once in case there is heavy wireless interference.
Best regards.
- Copy Link
- Report Inappropriate Content
Hi, Deco X50_V1/V1.2 with the latest firmware support VPN server/client and HomeShield.
After adding Deco X50 as the main Deco, the new Mesh system will start using HomeShield and support VPN. The new Mesh network will also have the signal source selection.
Best regards.
Not yet. If the official version is ready, I will update the community as soon as possible.
Best regards.
- Copy Link
- Report Inappropriate Content
@David-TP network optimization not worked properly.
- Copy Link
- Report Inappropriate Content
@David-TP I had been told a while back the 1.7 support for the S4 was still on the way, yet it still seems far out of reach. It's been years since the S4 was last updated. Has support for this model simply been dropped?
- Copy Link
- Report Inappropriate Content
Hi, Nice to see you again.
Deco S4 is very similar to Deco M4 in many ways. I think there will be similar firmware released to Deco S4_V2.
It is quite like Deco X50_V1 and users often complained to me why we only updated Deco X50_V1. Actually, similar firmware will gradually roll out to other models.
- Copy Link
- Report Inappropriate Content
Hi, Thanks for the feedback.
Any chance you could let me know what happened to "Network Optimization"?
I think 1.7.0 or recent APP updates don't make any modifications to this feature yet.
Best regards.
- Copy Link
- Report Inappropriate Content
@David-TP But that's what I struggle to understand. If the M4 and S4 are so similar, why has the S4 not been updated? A gradual rollout is gradual, sure it can take time, but this has been nonexistent to this point. There's no sign of it or any sign it's being worked on. If they're similar, surely it shouldn't take months or years between them?
- Copy Link
- Report Inappropriate Content
@David-TP It'll great to see the support of WPA3 in next update of this beta firmware for M4 !!
- Copy Link
- Report Inappropriate Content
@Rafid_Anjum I don't think that's ever gonna happen, but we can only hope...
- Copy Link
- Report Inappropriate Content
installed just now on M4R v2.0.
Smart DHCP can be disabled - test successfull - after physical disconnect from ETH the Deco is going red, after reconnect is all fine again - red-madness is apparently gone 
on the other hand, I cannot open Systen Parameters in Advenced menu of WebUI - just eternal spinning circle........
/BR
ZoloN
- Copy Link
- Report Inappropriate Content
Information
Helpful: 5
Views: 13628
Replies: 105
Voters 3
