TC70 ONVIF PT(z) control randomly stops working
as the title really - i'm using Zoneminder and when i attempt to control the Pan&Tilt feature of the tc70 will sometimes go unresponsive and self-reboot to recover itself.
There doesnt appear to be any reproducible way to cause the issue - it seems random. I've used it maybe 10-15 times over the last few hours and no issues, then it crashed & rebooted.
It's on the latest firmware, on a network that is isolated from the internet (LAN-only connectivity).
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
looks like a factory reset has fixed whatever the issue was. Did the reset 4-5 days ago and not had a single issue since.
- Copy Link
- Report Inappropriate Content
Hi,
When you can't pan & tilt the camera via an ONVIF connection, can you stream the camera's live feed?
You can go to the camera's Device Settings> Reboot Camera page to enable the Auto Reboot feature and check if it helps.
Best Regards
- Copy Link
- Report Inappropriate Content
@Solla-topee no, the stream is dead too (as are pings to the IP address, which then respond again once the camera boots back up). From everything i can tell, the camera is freezing and self-rebooting via the Auto Reboot feature (already enabled).
the camera also goes through it's startup axis calibration process; full pan & tilt limits and then centers itself before continuing, which is why i know it's crashing&rebooting.
I'm still trying to get more info on exactly whats going on - I'll try the tapo app, Onvif Device Manager (ODM) software if i can get it to talk to the TC70, and another NVR software.
The random nature of the issue might be difficult to be 100% sure on behaviour
- Copy Link
- Report Inappropriate Content
Hi,
From your description, it's more likely the camera rebooted itself so the ONVIF connection disconnects. You can check if the following steps will help.
What Can I Do if My Camera Frequently Stucks or Reboots?
Best Regards
- Copy Link
- Report Inappropriate Content
looks like a factory reset has fixed whatever the issue was. Did the reset 4-5 days ago and not had a single issue since.
- Copy Link
- Report Inappropriate Content
@veehexx Glad to hear the case is solved! 
- Copy Link
- Report Inappropriate Content
@Solla-topee looks like it wasnt related to the fw reset, but appears to be related to blocking internet access on TC70. i use a local NVR and block all internet-bound traffic on my IPCam's.
Obivously i had to re-enable internet traffic to allow the tapo app to re-configure the TC70 after the reset the other week, and only yesterday I re-blocked internet. first attempt at PT movement today made the camera crash.
i guess theres some relance on internet connection for it to work reliably. feels like a fw bug since ONVIF, afaik, is a local-only protocol.
It'd be nice to see this fixed in a future update, but not a major issue if i have to keep internet access enabled.
- Copy Link
- Report Inappropriate Content
Hi,
After blocking the internet connection, can you ping the TC70's IP address on the local NVR? Generally, the LAN connection between the TC70 and the NVR should work even without an internet connection if they are under the same network, then you can try to stream and control the camera to Pan&Tilt via the ONVIF connection.
Best Regards
- Copy Link
- Report Inappropriate Content
sorry, i didnt get an alert when you responded so only just seen your reply. Yes, the camera continues to stream reliably to the NVR after blocking internet. the issue seems specific to the ONVIF movement control
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 465
Replies: 8
Voters 0
No one has voted for it yet.