P110 smart plugs not turning off
I have 2 x P110 smart plugs that now will not switch the power off.
The app says the plugs are off but they are still feeding power. I used the manual power switch but, although it made a click noise, it did not turn off the power.
I checked both plugs were the latest firmware and then factory reset them, having to add them to the app again
Didn't make a difference. Still can't turn off the power. You hear the click on the app but makes no difference to the power feed.
Any suggestions to fix this because I'm at a loss?
Double-check if the appliance exceeds the limit of the smart plug. Long-term overloads can easily cause plug damage.
You can try to leave the device unplugged for a while before continuing to use it. Unplug it from power and gently tap one of its sides to a level surface, try several times until it returns to work.
If the problem persists, contact local TP-Link support for further assistance.
E.g. Specifications of Tapo P110 (EU) V1.20
Double-check if the appliance exceeds the limit of the smart plug. Long-term overloads can easily cause plug damage.
You can try to leave the device unplugged for a while before continuing to use it. Unplug it from power and gently tap one of its sides to a level surface, try several times until it returns to work.
If the problem persists, contact local TP-Link support for further assistance.
E.g. Specifications of Tapo P110 (EU) V1.20
