Slow speeds on satallite deco m4

Slow speeds on satallite deco m4

Slow speeds on satallite deco m4
Slow speeds on satallite deco m4
2024-08-17 14:29:11 - last edited 2024-08-17 14:40:24
Model: Deco M4  
Hardware Version: V2
Firmware Version: 1.6.2

Hey!

 

I have two DECOs M4 setup like this in access point mode

 

Router --(ethernet)-> Main Deco ---(ethernet)--> Satallite Deco

 

The main deco I only have devices connected through wi-fi and everything is fine

On the satallite deco I have devices connected through wi-fi and ethernet (no switches)

 

And every day after a while, the speeds reduce from the normal 500/100 to 100/100 and this only happens on the satallite deco for both WI-FI and ethernet

 

After I do some change, like changing from AP to router mode, or deactivate the eco mode (which reboots the devices) everything is fine for a while, but then we are back to the same

 

Any ideas?

 

  0      
  0      
#1
Options
2 Reply
Re:Slow speeds on satallite deco m4
2024-08-17 14:48:10

  @Sticko 

 

You should replace Ethernet cable between Satellite Deco and Main Deco.

 

Based on your description, after Deco mesh reboot or restart Satellite Deco negotiates gigabit speed over Ethernet cable to Main Deco, but they are unable to keep that speed due to issues with Ethernet cable, and negotiate it down to 100Mbps.

  0  
  0  
#2
Options
Re:Slow speeds on satallite deco m4
2024-08-17 15:56:18

  @Alexandre. I already tried that, with multiple cables cat 6 or above, stays ok for a while and then back to 100mbps

  0  
  0  
#3
Options