Need X50 deco fw downgrade

Need X50 deco fw downgrade

Need X50 deco fw downgrade
Need X50 deco fw downgrade
a week ago - last edited a week ago
Model: Deco X50  
Hardware Version: V1
Firmware Version: 1.6.0

Hello!

 

Lately, my wifi connection has been very unstable since deco was automatically updated to version 1.5.5 fw. Many of my smart devices, smart phones, Wi-Fi thermostats, drop Wi-Fi very often. I did a full factory reset, reset everything, but it's still bad. I read that someone else is experiencing this error with version 1.5.5 and they suggested I try to update to 1.6.0 beta fw. I updated it, but the wifi is still unstable. I would like to downgrade the last working version, which is version 1.4.1 fw. As I read, this can only be done using the Firmware Recovery Tool, but the maximum size of the max fw file size 32mb. On the Tp link product support page, all fw files are larger than 32mb. I would like to request an old firmware that is smaller than 32mb.

  1      
  1      
#1
Options
1 Accepted Solution
Re:Need X50 deco fw downgrade-Solution
a week ago - last edited a week ago

  @David-TP 

 

Dear David!

 

Yes, in the meantime I found the old fw file and did the downgrade on all 3 of my deco devices. Everything has been working flawlessly since then, I hope it stays that way :) Unfortunately, the 1.5.5 and 1.6.0 beta fw were also unstable for me. Now I won't update for quite some time to keep the network stable

 

Thank you, Balazs

Recommended Solution
  1  
  1  
#3
Options
2 Reply
Re:Need X50 deco fw downgrade
a week ago

  @Balazs-tp 

Hi, welcome to the community.

After checking the TP-Link ID, I noticed you have been downgraded to 1.4.1 already. Are the smart home devices having a stable connection now?

However, if they were still disconnected occasionally, it is also suggested to install the beta firmware here:

Satellite Deco Units Work Well but Display Offline on the Deco APP

 

Thank you very much and best regards.

  0  
  0  
#2
Options
Re:Need X50 deco fw downgrade-Solution
a week ago - last edited a week ago

  @David-TP 

 

Dear David!

 

Yes, in the meantime I found the old fw file and did the downgrade on all 3 of my deco devices. Everything has been working flawlessly since then, I hope it stays that way :) Unfortunately, the 1.5.5 and 1.6.0 beta fw were also unstable for me. Now I won't update for quite some time to keep the network stable

 

Thank you, Balazs

Recommended Solution
  1  
  1  
#3
Options