Deco BE65 Failed, reset does not reconnect

Deco BE65 Failed, reset does not reconnect

Deco BE65 Failed, reset does not reconnect
Deco BE65 Failed, reset does not reconnect
Tuesday
Model: Deco BE65  
Hardware Version: V2
Firmware Version: 1.06 Build 20240724 Rel. 12326

My BE65 system is only two months old.

The main node failed showing a solid red LED. I reset the node, but I am unable to get it to connect using the app.

 

Below is the sequence and symptoms:

 

  1. Press reset - yellow LED flashes, then goes solid for 2-3 minutes.
  2. Blue LED blinks, so I attempt to connect using the app.
  3. Blue LED goes solid, but the app did not detect the node.
  4. Yellow LED then goes solid and stays solid.

 

I have another two nodes, so I reset them and recreated the network without any issues. They have firmware version 1.06 Build 20240724 Rel. 12326 installed.

I cannot confirm whether the faulty node has the same firmware, because I cannot connect to it.

 

I am using Access Point Mode.

  1      
  1      
#1
Options
1 Reply
Re:Deco BE65 Failed, reset does not reconnect
Yesterday

  @NeilsOnWheels 

Hi, welcome to the community.

Could you please switch the power adapter of this "Solid yellow" Deco with the adapter of the other two units? Please also change to a different power socket if possible.

 

By the way, can you still detect the default WiFi SSID(such as Deco_xxxx, the last 4 characters of the MAC address) of this Deco?

 

Wait for your reply and best regards.

 

  0  
  0  
#2
Options