Home Network Community > Deco > Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More
< Deco

Official Release Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More

1234

Official Release Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More

Official ReleaseDeco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More
Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More
2 weeks ago - last edited a week ago
Tags: #Firmware Update #WireGuard #DoH/DoT #Wi-Fi Access Control
Model: Deco X50-5G  
Hardware Version: V1
Firmware Version: 1.2.0

This Article Applied to:

Deco X50-5G_V1

 

 

Modifications and Bug Fixes:

Note: Certain features require the support of all Deco units in the Mesh network.

 

 

 

Firmware Download Link:

Deco X50-5G(US/EU/JP/TW)_V1 1.2.0_build_20241011_Official Version Newly updated to Deco 1.12.0 Firmware Platform
 
Deco X50-5G(SG)_V1 1.2.0_build_20241011

Update Advice:

1. Please make sure the Deco APP is up-to-date.
2. How to manually update the firmware via web UI- How to Update the Firmware of Deco.
3. This firmware can not be degraded to the previous version.

 

 

Please feel free to comment below if you have any concerns about this firmware.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
  0      
 
  0      
 
#1
Options
31 Reply
Re:Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More
a week ago - last edited a week ago

  @David-TP 

 

I am thinking of trying it out even if it is early access. Is it safe? Will I have any problems with my X50-5g warranty?

  0  
  0  
#2
Options
Re:Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More
a week ago

  @David-TP tested it. Still doesn't solve the issue I raised here.

 

https://community.tp-link.com/en/home/forum/topic/716208

  0  
  0  
#3
Options
Re:Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More
a week ago

  @David-TP 

 

I also installed it. Looks nice with all the extra options. I already enabled the internet backup mode.

 

I will keep testing.

  1  
  1  
#4
Options
Re:Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More
a week ago

  @David-TP Somehow it also shows unusually high CPU usage at 100% every time i open the device info page. Which explains why my Deco X50-5G randomly goes off throughout the day, which also proves what I mentioned before that the error log kept showing very high temperature error messages previously.

 

 

 

 

 

  0  
  0  
#5
Options
Re:Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More
a week ago

  @David-TP I haven't encountered any problems so far with the beta. Device is stable and cpu usage seem normal. But I can't find the MTU settings and the Static Route configuration anywhere. Is that supposed to be in this beta?

  2  
  2  
#6
Options
Re:Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More
a week ago

  @David-TP The "Deco EasyMesh" is supported in x50 v1.2 which is only updated to "Deco 1.11.0 Firmware Platform". So why this model doesn't support this function? What's more, i haven't seen this "deco easymeh" in the article "Differences Among Deco Firmware Platforms". Is it just for specific model?

  1  
  1  
#7
Options
Re:Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More
a week ago

  @David-TP I really hope the devs add the proper band lock option in the final release of this firmware. 😁 🙏

 

 

 

My request is described here: https://community.tp-link.com/en/home/forum/topic/706162?replyId=1439534

  1  
  1  
#8
Options
Re:Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More
a week ago

  @lanos 

Hi, the MTU is usually under "Internet" settings, and "Static Route" should be under More>Advanced.

Can you find these two features in these locations?

If still not, I wonder whether the engineer might refer to "Wireless Router" mode, instead of the 4G/5G router mode. I would also check with him later for confirmation.

Wait for your reply and best regards.

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
  0  
  0  
#9
Options
Re:Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More
a week ago

  @Hibiki 

Hi, Deco EasyMesh is still a separate feature only added to a specific model. Currently, Deco X50_v1.2 is the only model that has supported Deco EasyMesh.

Thank you very much and best regards.

 

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
  1  
  1  
#10
Options
Re:Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More
a week ago

  @David-TP can you check with your team and engineers on the extremely unusually high CPU usage (almost always 100%) and memory usage with the X50-5G with the latest firmware?

 

You can refer to the reply slightly above.

 

I'll repost another screenshot here.

 

  1  
  1  
#11
Options
1234

Information

Helpful: 0

Views: 1997

Replies: 31

Tags

Firmware Update WireGuard DoH/DoT Wi-Fi Access Control
Related Articles
VPN feature for Deco X50-5G
2243 4
No 5G option on my Deco x50-5g
1347 1
 Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More
1453 0
Add VPN Client/Server to X50-5G
239 0
 Deco X50-V1.2-1.4.5 Supports EasyMesh, Wireguard VPN and Fixed WAN Port
2961 0
Deco X50-5G mesh with X60 Decos - turn off wifi only on the X50-5G
259 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.