Official Release Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More
This Article Applied to:
Deco X50-5G_V1
Modifications and Bug Fixes:
Note: Certain features require the support of all Deco units in the Mesh network.
- Supported MTU configuration and Static Route.
- Supported IOT Network and Connection Preference.
- Supported VPN Server/Client and WireGuard VPN Protocol.
- Added WiFi Access Control / Allow List.
- Added ECO Mode and Wi-Fi Schedule.
- Added Firmware Auto Update.
- Added QOS on/off toggle.
- Supported Speed Limit.
- Supported TKIP Protocol and Introduced more Tapo/Kasa products under Smart Home.
- Added the detection of Ethernet connection speed.
- Supported setting a fixed WAN port.
- Supported Guest Network Portal and Portal Authentication in AP mode.
- Supported Hybrid Mesh and Internet Backup Mode.
- Supported DOH/DOT.
- Added Fing Device MAC Identification.
- Supported LED Schedule.
- Supported IPv6 onboarding.
- Optimized a series of network experience
Firmware Version:
| Deco X50-5G(US/EU/JP/TW)_V1 | 1.2.0_build_20241011 |
Newly updated to Deco 1.12.0 Firmware Platform |
| Deco X50-5G(SG)_V1 |
Update Advice:
1. Please make sure the Deco APP is up-to-date.
2. How to manually update the firmware via web UI- How to Update the Firmware of Deco.
3. This firmware can not be degraded to the previous version.
Please feel free to comment below if you have any concerns about this firmware.
Related Article:
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@David-TP Hi, First would like to say sorry for my english. I'm french.
I bought a X50-5G for my mother end of october. I dont have direct access to the device but i help her using remote access on app.
We had no problem during one month then the new firmware has been suggested from the app last week.
We decided to install it.
After two days, the google tv which are Xiaomi Mi Box (2 devices) shown the message Limited connection on wifi setting. We have had 4g router Huawei B715 over 5 years and we never had any issue. Some users suggest to change date and time. I did this change but issue come again. Time zone on the app is correct. I decided to disable Beamforming and mesh on deco app but issue remains.
It seems that this issue is coming with the new firmware.
Mobile ISP profile is as follow : IPV4 & static
Do you have any suggestion to solve it ?
We paid for a device with technologies but we need to disable all settings. That's a mess...
Please fix all issues then release a correction.
Thank you in advance.
- Copy Link
- Report Inappropriate Content
Hi, Thank you very much for the feedback.
Could you please also help me check the CPU Usage on the Deco APP under Deco APP>More>System? Would it stay at 100% most of the time?
Apart from Google TV/Xiaomi Mi Box, Did other mobile devices have similar issues of reporting limited connection?
Here are some suggestions for your reference:
1. set "Address Reservation" for the Mi Box.
2. Please also restart the Mi Box once.
3. Please refer to Xiaomi Mi TV Box: Connected to WiFi But No Internet? - Fixed! to see whether correcting the date and time on the Mi Box helps.
Best regards.
- Copy Link
- Report Inappropriate Content
@David-TP Hi David, thanks for your prompt reply. I did not notice that cpu is at 100%. I checked this point and it was always good. Others devices work well without connection issue. I added the IP reservation as you suggest. I will revert back to you here in case Limited connection appears again on xaiomi mi box tv. I also changed DHCP for Google DNS in lan setting since issue is with google tv and some user recommand to use their DNS . Thanks again for your response and I hope that everything will be ok from now with X50-5G and mesh system (+ 2 deco x55).
- Copy Link
- Report Inappropriate Content
@David-TP The firmware has now apparently been removed. What is the reason for that?
- Copy Link
- Report Inappropriate Content
Update:
Hi All,
Thanks for the feedback. A new beta version which has fixed the reported issues here has been updated here:
Deco X50-5G_V1_1.2.1 with IoT and CPU Optimization
Best regards.
- Copy Link
- Report Inappropriate Content
Dear David, do you know if this beta also includes the "band lock" firmware?
Fyi, the devs contacted me a few weeks ago and provided to me a beta version of the 1.2.0 firmware which properly locks the bands and works as expected (as per my suggestions/requests here---> https://community.tp-link.com/en/home/forum/topic/706162?replyId=1439534 ).
If I install the 1.2.1 beta firmware, will I lose this band lock functionality?
- Copy Link
- Report Inappropriate Content
@David-TP Thank you. The CPU load is now down to around 15% while it was 80%+ on the last one.
- Copy Link
- Report Inappropriate Content
@David-TP Installed it just now and within 1-2 hours CPU usage is still very high but I will let it stabilise for the next few days and report back.
- Copy Link
- Report Inappropriate Content
Hi, Thanks for the update.
By the way, please make sure the beta firmware you have installed is the buile1217 here, not the 1203 I sent earlier.
https://community.tp-link.com/en/home/forum/topic/727392
Best regards.
- Copy Link
- Report Inappropriate Content
Yes, the 1217 beta also includes the build20241124 beta fix about the band lock.
Best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 4194
Replies: 52
Voters 0
No one has voted for it yet.