Beta Software Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul
Great news to Archer AX90 owners!
We are so excited to share a public beta version of firmware for Archer AX90 V1 with the community, which has added support for EasyMesh. If you're looking for a mesh solution with your existing Archer AX90, don't hesitate to upgrade and install this beta firmware to try it out.
This Article Applies to:
Archer AX90 V1/V1.20
New Features and Modifications:
- Added support for EasyMesh and Ethernet backhaul.
Firmware Download
Before the Upgrade
(1) Please be sure you have read the Beta Test Agreement before upgrading the BETA firmware!
(2) For the sake of insurance, it's always recommended to save a copy of the router Backup Config file before upgrading or downgrading.
(3) This version of software contains important updates with EasyMesh, so it CANNOT be degraded to the previous version.
(4) EasyMesh would not be available when the router works in Access Point mode.
(5) You may follow the guide to upgrade the firmware of your router. How to Upgrade the Firmware on the TP-Link Wi-Fi Routers.
(6) This public beta firmware for Archer AX90 V1 can be applied to all versions (EU/US/JP/TW/etc.).
Direct Firmware Download link:
Archer AX90_V1&V1.20_1.2.0 Build 20241125 (Beta Software)
Additional Information
As always, we value your feedback. If somehow you encounter an issue during or after the router firmware upgrade, it's suggested to comment below with the following info. Your input helps us continue to improve and provide the best possible products and support.
- Detailed issue description, and provide more information on the specific conditions that seem to trigger the problem.
Related Articles:
How to Build an Ethernet Backhaul Using Two EasyMesh Routers?
What is EasyMesh?
What is Wi-Fi EasyMesh and how does it work with TP-Link routers and extenders?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Definitely missed that in the wall of text. Thanks!
- Copy Link
- Report Inappropriate Content
@Itai__ A mi me aparece igual , mi router se reinicia cada cierto tiempo aleatorio. aveces pienso por que es sobre calentamiento . pero todo empezo desde la beta que instale.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
greedxD wrote
@Itai__ A mi me aparece igual , mi router se reinicia cada cierto tiempo aleatorio. aveces pienso por que es sobre calentamiento . pero todo empezo desde la beta que instale.
Hello @greedxD
Have you been able to try my previous suggestions in the following link?
https://community.tp-link.com/en/home/forum/topic/718008?replyId=1582266
Please provide more details about your network and usage, and we can then do our best to figure it out.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Thank's
- Copy Link
- Report Inappropriate Content
@Kevin_Z i geninuinely despise this company, and cannot wait until my equipment dies so i can never buy another tp-link product again
i have been waiting for eashmesh with Ethernet Backhaul for AX90 and RE815X for over 3 years, to no avail.
you guys suck at this
- Copy Link
- Report Inappropriate Content
@Kevin_Z Do you happen to have at least a rough estimation on when we can expect ethernet backhaul easy mesh in AP mode, or even at least a confirmation that it will be released?? (maybe you have access to a very early beta that can be user tested?)
Im using the Archer AX90 since 2021 (and I'm using TP-Link exclusively sine 2010 1043nd open wrt) and it was great until I needed to expand with 3(4) years of waiting for an Ethernet backhaul.
Now its here and works well for me with an re700x extender, but at this point my Internet connection was upgraded and Archer is not enough anymore as a main router since it has too weak lan ports:(
The AX90, RE700X combo would still be great since its still future proof for at least couple of years as a wifi AP, but with the 3 years wait time for ethernet backhaul in router mode I wonder if it is even developed.
For me an walk around this would be to leave AX90 in router mode with DHCP and NAT turned off. I have heard that this way I can use it as a bridge, but I have been trying this for the last 3 days without much luck.
Do you happen to have ANY information on how to do this properly? my hw is 1.0 and firmware is 1.2.0 Build 20241125 rel.8976(4555).
- Copy Link
- Report Inappropriate Content
@Kevin_Z Que tipo de detalles necesita para que pueda ayudarme?
- Copy Link
- Report Inappropriate Content
greedxD wrote
@Kevin_Z Que tipo de detalles necesita para que pueda ayudarme?
Hey @greedxD
I've asked some questions to understand the current situation, while I haven't get a response from you. As you can see from these two responses:
https://community.tp-link.com/en/home/forum/topic/718008?replyId=1649714
https://community.tp-link.com/en/home/forum/topic/718008?replyId=1582266
Can you please confirm? Thank you very much.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 21047
Replies: 71
Voters 0
No one has voted for it yet.