Early Access Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection
This Article Applies to:
Archer BE800 V1
New Features and Modifications:
- Newly support 3-band (2.4GHz + 5GHz + 6GHz) MLO connection.
- Newly support EasyMesh in AP mode.
- Newly support DoH/DoT.
- Enhanced system stability and security.
Firmware Download
Before the Upgrade
(1) Please be sure you have read the Beta Test Agreement before upgrading the pre-release firmware!
(2) For the sake of insurance, it's always recommended to save a copy of the router Backup Config file before upgrading or downgrading.
(3) You may follow the guide to upgrade the firmware of your router. How to Upgrade the Firmware on the TP-Link Wi-Fi Routers.
(4) This pre-release firmware for Archer BE800 V1 can be applied to all versions (EU/US/JP/TW/etc.).
(5) This version of software can be degraded to the previous version.
(6) To use the new 3-band MLO connection, both the router and client device must support Wi-Fi 7 and 3-band MLO. Please note that most Wi-Fi 7 smartphones and network adapters may only support 2.4GHz + 5GHz or 2.4GHz + 6GHz when connecting to the MLO Network.
Direct Firmware Download link:
Archer BE800_V1_1.1.99 Build 20241126 (Pre-release Software)
Additional Information
As always, we value your feedback. If somehow you encounter an issue during or after the router firmware upgrade, it's suggested to comment below with the following info. Your input helps us continue to improve and provide the best possible products and support.
- Detailed issue description, and provide more information on the specific conditions that seem to trigger the problem.
Related Articles:
EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller
Wi-Fi Routers Support DoH and DoT Network
What is WiFi 7’s Multi-Link Operation (MLO)?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
When I re-connected the old routers back into the mesh network, both Tplink Web UI and Tether (logged into BE800) would incorrectly show my iot devices are Ethernet wired to my old router. All my iots were actually wirelessly connected to BE800 only.
- Copy Link
- Report Inappropriate Content
Thank you very much for all the details.
Regarding the web UI display issue with all three satellite EasyMesh nodes connected to the BE800, can the issue be reproduced consistently? Our engineering team would like to investigate further and may need to collaborate with you.
If possible, we'll contact you via your registered email to discuss this further.
- Copy Link
- Report Inappropriate Content
Yes. The issue is reproducible. I would say 50% chance of recurrence.
Sure, they can contact me through email.
- Copy Link
- Report Inappropriate Content
Hello Kevin. I found a new bug.
On my BE800 device, stop showing my DNS name from TP-LINK, which I provided before.
Also, I can't add any more new dynamic DNS for my USB storage for FTP. (but the old one still works, and I can log in to my FTP by DNS name even if it does not show up lol)
- Copy Link
- Report Inappropriate Content
@Kevin_Z - I'm not sure if anyone else is seeing this, but I'm experiencing an oddities where none of my wireless devies are connecting to 5Ghz except for any devices connected to MLO.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
TheSassyBear wrote
@Kevin_Z - I'm not sure if anyone else is seeing this, but I'm experiencing an oddities where none of my wireless devies are connecting to 5Ghz except for any devices connected to MLO.
@TheSassyBear Do you mean no devices can connect to the normal 5G network but they can connect to the MLO Network via 5G?
Could you please show me the wireless network settings on the BE800? You can mask the SSID and password of course.
Please also clarify if the 5G network worked fine before updating to this pre-release version. Thank you.
- Copy Link
- Report Inappropriate Content
The 5ghz issue happens with Samsung devices when 5ghz channel is 100 and above. Manually setting it resolved it for me.
- Copy Link
- Report Inappropriate Content
Firmware used for a few weeks.
BE800 in AP mode wite RE800BE as satellite
I have issues with:
- MLO not extended on satellite (one MLO ssid with AP, another with repeater)
- Samba server for USB drive not visible by windows 11
- My printer (only 2.5 ghz wifi) do not work properly on MLO, more stable on a simple 2.5 wifi on a third party AP.
- Copy Link
- Report Inappropriate Content
2 BE800 in AP mode, wired backhaul. When trying to enable EasyMesh on the satellite one I get the "Change to Satellite Router mode?" prompt, which I confirm, but then the "Joining..." progress bar just goes to 100% without ever finishing or any indication of an error. In the main router, the satellite one does not pop up when looking for satellite routers. Any hints?
Edit: What worked is a factory reset of the satellite router, and then trying to add it straight away from the main router.
However, discovered another issue - the LED screen settings are not synchronized. I have a custom text set up on the main router, but the satellite one still shows the default one.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 4503
Replies: 63
Voters 1