Early Access Archer BE805 Newly Supports EasyMesh in AP Mode, 6GHz EasyMesh Backhaul, DoH&DoT, ECO Mode, and More
This Article applied to:
Archer BE805 V1.0/V1.60
Modifications and Improvement
- Enhanced the compatibility with the NTT ISP.
- Newly added HomeShield function in V6plus dial-up.
- Newly added VPN Client and Server function in V6plus dial-up.
- Newly added IPOE dialing function and adjusted some dialing order.
- Newly added webpage management for the EasyMesh Satellite mode.
- Newly added the EasyMesh Topology map on the EasyMesh function page.
- Newly supported to work as EasyMesh controller in AP mode.
- Newly supported 6GHz EasyMesh backhaul.
- Newly supported WiFi schedule for different wireless frequencies.
- Newly supported ECO mode to save power.
- Newly supported DoH & DoT function.
- Newly supported multiple selections in the Access Control Allow list function.
- Newly supported third-party VPN built-in function to simplify the configuration process.
- Newly supported Tap mode in OpenVPN server function.
- Newly updated the PPTP/L2TP/IPsec VPN server IP range to the same as the LAN IP range.
- Fixed the issue that tplinkwifi.net might fail to reach the router.
- Optimized the USB performance.
- Enhanced VPN performance.
- Enhanced system stability.
Note: Once upgrade to the 1.1.0 version, you cannot downgrade back to the 1.0.x firmware.
Firmware Download:
Before the Upgrade
(1) Please be sure you have read the Beta Test Agreement before upgrading the pre-release firmware!
(2) For the sake of insurance, it's always recommended to save a copy of the router Backup Config file before upgrading or downgrading.
(3) This pre-release firmware for Archer BE805 V1.0/V1.60 can be applied to all versions (EU/US/JP/TW/etc.).
(4) You may follow the guide to upgrade the firmware of your router. How to Upgrade the Firmware on the TP-Link Wi-Fi Routers.
Direct Firmware Download Link
| Archer BE805_V1.0&V1.60 | Archer BE805_V1.0/V1.60_1.1.0_Build 20241025 (Pre-release Firmware) |
Additional Information
As always, we value your feedback. If somehow you encounter an issue during or after the router firmware upgrade, it's suggested to comment below with the following info. Your input helps us continue improving and providing the best products and support.
- Detailed issue description, and provide more information on the specific conditions that seem to trigger the problem.
Related Articles:
Wi-Fi Routers Support DoH and DoT Network
EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller
Thank you so much for your screenshots. Much appreciated.
I confirmed with the development as well and have updated my thread to list the modifications in more detail.