Official Release Deco M9 Plus_1.8.1 with Wi-Fi Access Control and ECO Mode Ready for Test
This Article applies to
Deco M9 Plus_V2.0/V2.2_1.6.4
Firmware Modifications and Bug Fixes
- Added Static Routing.
- Added Firmware Auto Update.
- Added Wi-Fi Access Control feature to support block list and allow list.
- Added Matter protocol.
- Add ECO Mode
- Supported KLAP protocol for adding new Kasa/Tapo models under Smart Home.
- Fixed the bug of certain programs and services not being loaded properly after turning on the QoS.
- Improved system stability.
Firmware Download Link
| Deco M9 Plus_V2.0/V2.2 | 1.8.1_Build 20250219_Official | Newly updated to 1.10.0 Platform |
Update Advice:
- How to update the firmware via web UI.
- Firmware recovery is needed if users want to revert to the official 1.6.4: How to Downgrade Deco
Hi, thank you very much for the feedback.
Can I have some screenshots of the current network topology, such as:
Do you mean if the "Connection Preference" of the satellite Deco X50-outdoor is set to one of the M9 plus, it can't connect to this M9 plus?
-Would it completely disconnect from the Mesh network and turn flashing red, or will it automatically pick up another satellite Deco？
-Can you consistently reproduce this issue?
Wait for your reply.
Best regards.
@David-TP Hello please see the provided screenshots.
"Arrie out" is x50-outdoor which is "connection preference" to "Kontoris" a m9 running 1.8.1. It always connect to AP "pit from hell", an m5 running 1.7.8.
Even if i restart all the invovled APs (like restart "Arrie out" and wait for connect, it always connects to "pit from hell", before 1.8.1 of the 3 m9s it always connected to "Kontoris" as the software tells it to.
