TP-Link Community > Tapo Smart Camera > C520WS failing to keep time, keeps advancing an hour
< Tapo Smart Camera

C520WS failing to keep time, keeps advancing an hour

C520WS failing to keep time, keeps advancing an hour

C520WS failing to keep time, keeps advancing an hour
C520WS failing to keep time, keeps advancing an hour
Yesterday
Tags: #Firmware #Timezone
Model: Tapo C520WS  
Hardware Version: V1
Firmware Version: 1.3.4

Hello!

 

I've recently started to notice that both of my Tapo C520WS cameras are advancing time on there own.

 

Going in and resetting the timezone (by reselecting the same one) fixes it for 2-30 seconds, before it just goes back to what it wants to do. 
 

All of my NTP settings on my network are configured correctly, none of my other devices and/or router is showing this activity, and neither are my other cameras, it's just these two C520WS's. 

  1      
 
  1      
 
#1
Options
3 Reply
Re:C520WS failing to keep time, keeps advancing an hour
Yesterday

  @TJCreations 

Hi,
You can refer to the following instructions to troubleshoot if the camera's date or time is incorrect.
Tapo Camera Shows Wrong Date and Time
 

If the Tapo C520WS is connected to a third-party app via RTSP/ONVIF, please go to the Tapo app > camera's Device Settings > Advanced Settings > Camera Account page to turn off this option, then check whether the camera shows the correct date and time.

 

Best Regards

>> What to do if the Detection feature is not working on the TP-Link Camera. >> Enhance Video Clarity: Troubleshooting Tips for Improving Camera Video Quality. >> General questions about the TP-Link camera's Pan & Tilt feature.
  0  
  0  
#2
Options
Re:C520WS failing to keep time, keeps advancing an hour
Yesterday

  @Solla-topee camera account was enabled as it goes to my Synology.

 

Disabled it, restarted the camera, reset the time back to correct timing, and it advanced its time again. Tried 3 additional times to get it to stay at the correct time, and it kept advancing.

 

Turned the camera account back on, and it did the exact same behaviour as listed above. 

  0  
  0  
#3
Options
Re:C520WS failing to keep time, keeps advancing an hour
Yesterday - last edited Yesterday

  @TJCreations 

Hi,
Please confirm the following information for further analysis.


  1. Which country are you located in? What's your time zone?
  2. Please disable the camera's Camera Account option in the Tapo app, reboot the camera, go to its Device Settings > Device Info > Time Zone page, and send me a picture of the time zone it selects.
  3. What date & time display on the camera's Live View page in the Tapo app, and what time displays on your phone?

  4. Please send me (@Solla-topee) the camera's MAC address via a private message.

Best Regards

>> What to do if the Detection feature is not working on the TP-Link Camera. >> Enhance Video Clarity: Troubleshooting Tips for Improving Camera Video Quality. >> General questions about the TP-Link camera's Pan & Tilt feature.
  0  
  0  
#4
Options

Information

Helpful: 1

Views: 54

Replies: 3

Tags

Firmware
Timezone
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.