Home Network Community > Wi-Fi Routers > BE230 puts DHCP requests every 30s despite putting it in static IP mode
< Wi-Fi Routers

BE230 puts DHCP requests every 30s despite putting it in static IP mode

BE230 puts DHCP requests every 30s despite putting it in static IP mode

BE230 puts DHCP requests every 30s despite putting it in static IP mode
BE230 puts DHCP requests every 30s despite putting it in static IP mode
12 hours ago
Tags: #Network Connectivity #Firmware Update #WDS/Range Extender Mode #IPv6 #BE230
Model: Archer BE230  
Hardware Version: V1
Firmware Version: be230v1_be230v1.20_all-up-ver1-2-2-P1%5B20251114-rel11225%5D_2048_debug.bin

Hi, TP Link team,

I found another bug, I am currently using this router in AP mode and my ASUS BE86U as the primary router, as the BE230 has a lot of bugs. Some bugs I found:
1. DHCP lease failure in AP Mode. My ASUS BE86U has static entry for be230 pointing to 10.1.7.240 bound to be230 MAC address, but BE230 TP link is attempting to lease every 34 seconds even when I have fixed static entry.
Even in static IP mode in TP Link BE230 it puts DHCP requests indefinitely. 

CAUTION MY ASUS BE86U is not bugged, it is TP BE230 that is bugged. I am using ASUS Merlin Firmware
.
2. IPv6 is bugged as I mentioned earlier. IPv6 is not connecting after router auto restart in PPPoE, need to manually reboot only then it connects. I found out upon inspecting the packets that the Firmware is not handling these correctly.


TP BE230




ASUS BE 86 U




RE605X: 

  3      
 
  3      
 
#1
Options
6 Reply
Re:BE230 puts DHCP requests every 30s despite putting it in static IP mode
12 hours ago - last edited 12 hours ago

  @Archisman this device is buggy,





even on my mikrotik device i can see its making DHCP requests to the router eventho both be230 and mikrotik has it configured it as static

  1  
  1  
#2
Options
Re:BE230 puts DHCP requests every 30s despite putting it in static IP mode
11 hours ago

  @Archisman  I'm seeing the same issue — my TP-Link router logs are flooded with DHCP renewal requests every minute or so, with the lease showing 1/2 passed and immediately entering renewing state again. The router keeps getting the same IP (in my case 10.1.7.240) but the constant renewals suggest the WAN connection is dropping or the ISP's DHCP server is pushing a very short lease time. Try checking your WAN cable/connection stability and also see if your ISP is having any issues on their end — rebooting the modem (not just the router) helped in some cases I've read about.

  1  
  1  
#3
Options
Re:BE230 puts DHCP requests every 30s despite putting it in static IP mode
10 hours ago - last edited 10 hours ago

  @Archisman 

 

Hi,

 

The issue with the DHCP requests occurring every 30 seconds in AP mode is present on all of TP-Link's Archer routers, as long as they are configured to obtain their IP address via DHCP.

 

To stop this you would need to set a static IP address on the BE230 itself, via the menu Settings -> Network -> LAN. (and also subnet address and gateway address)

  0  
  0  
#4
Options
Re:BE230 puts DHCP requests every 30s despite putting it in static IP mode
10 hours ago - last edited 10 hours ago

  @woozle 

Hi,
I clearly said, the issue persists even in static IP mode (tested and verified 5 times and after factory reset too).

Kindly read & then comment, otherwise please don't comment only for upvotes. No thanks. 


Other users who commented they also are using static ip mode and we 3 cannot have the same issue together. Please check before commneting daft.

  0  
  0  
#5
Options
Re:BE230 puts DHCP requests every 30s despite putting it in static IP mode
10 hours ago

  @Archisman I think BE230 is forever bugged, even BE400 is getting some sort of updates to fix some bugs, if not all. BE230 might be the forgotten middle child, getting no care at all...
@Kevin_Z kindly check this bug, as this is of utmost importance.

Knowledge and Wisdom is the key to success
  0  
  0  
#6
Options
Re:BE230 puts DHCP requests every 30s despite putting it in static IP mode
6 hours ago

  @Archisman 

 

Pardon me, but your comment "My ASUS BE86U has static entry for be230 pointing to 10.1.7.240 bound to be230 MAC address ..." lead me to believe you were only configuring something on the ASUS router, which would not help with the issue.

 

If you have already set a static IP address on the BE230 itself (similar to the example shown in the picture below taken from a different TP-Link model), but the BE230 is still sending DHCP requests in AP mode, then you are right, this is indeed a new issue that does not exist on other TP-Link models and hence needs to be looked at by TP-Link.  @Joseph-TP

 

  0  
  0  
#7
Options

Information

Helpful: 3

Views: 105

Replies: 6

Tags

Network Connectivity Firmware Update WDS/Range Extender Mode IPv6
BE230
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.