MR.SLV6Offline
Following: 6Followers: 22
Forums/ Gateways
2025-08-30 09:11:07
Re:2.3.0 latest - Performance issues (LAN / VPN) and higher CPU utilization
@chicken689 Yes VPN is generally much slower, it applies to Wireguard OpenVPN and IPsec, CPU is also higher. previously CPU was at 3-4% now it is at 20 30% I have a remote ER650v2 which has a camera...
0HELPFULS
Forums/ Gateways
2025-08-30 08:57:27
Re:ER8411 site-to-site VPN with OpenVPN
@lkakas ok, a linux openvpn client, i haven't tested it. i have used other routers as a client and managed site to site, but it hasn't been easy but it has worked. but wireguard is probably a...
0HELPFULS
Forums/ Gateways
2025-08-30 08:36:20
Re:ER8411 site-to-site VPN with OpenVPN
@lkakas Which client are you using on the CGNAT side? Is it a router or another type of client? As Clive says, only Wireguard has a fixed IP. If it is a router, there are also options with Site to...
0HELPFULS
Forums/ Gateways
2025-08-30 08:15:37
Re:VLAN DHCP fails for Linux based servers
@tradenet make sure that you have enabled vlan on the interface that goes to the switch
0HELPFULS
Forums/ Controllers
2025-08-30 08:10:39
Re:Unable to turn off DNS proxy function in OC200.(FW.1.36.7 Build 20250707 Rel.72474)
@OC200V1 Scroll down
0HELPFULS
Forums/ Controllers
2025-08-30 08:06:54
Re:Lost control of all devices after installing new controller version
@KocherJJ Try to do another restore of the backup you took before you reset the controller, it is important that you do not reset any of the devices otherwise they will have to be adopted again. I...
0HELPFULS
1555657...