C200 - Two Problems
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I have noticed some problems with the C200 Camera - or if not the cameras, then possibly the mobile app.
I have cameras installed at a remote location. Fairly regularly, one or more of these cameras will become unavailable in the mobile app, even though other (non TAPO) devices at that same location remain connected to the Internet and can still be accessed.
This is my first concern: why are your cameras unavailable in the mobile app so often?
I have configured the cameras to automatically reboot each day in an attempt to solve this, and they will sometimes reconnect after the reboot. But the reboot can only be once a day, and days may pass when the cameras will remain off-line before they do reconnect. I can't tell whether the scheduled camera reboots are not happening or if these cameras are somehow faulty...
My second concern is that the recordings made whilst the cameras are unavailable in the mobile app sometimes have the wrong timestamp. A recording supposedly made during the day may actually have been made during the night, and vice-versa. The camera's real time clock is massively unreliable.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hello @Customer0
Can I know how about the Led status when issue occurs it is red or flashing green?
When issue occurs, please connect phone to Home Wi-Fi network and see if you could access the Camera on Tapo APP?
- If not, camera might disconnect from home Wi-Fi network, try to factory reset camera and set it up from scratch
- If you could access camera under home Wi-Fi network, but not remotely by LTE mobile data or non-local wifi network, try some suggestions in guide here
- Change router's DNS to 8.8.8.8/ 8.8.4.4
- Check modem/ router firewall log/ settings, and see request from smart plug has been blocked
- Make sure camera is connected to router directly, not through other AP or Range extenders
- Make sure tapo firmware in tapo app and tapo APP version are both up to date
- Check if there is any Advanced settings on router like access control/ parental control/ Mac Filtering settings may affect the camera
If the issue persist, can I know 1) what is the model of Wi-Fi router and network topology, e.g. ISPXX-- Router archer C7 <WiFI > Tapo camera
Can you share the Mac address of camera to us via private message?Thank you.
- Copy Link
- Report Inappropriate Content
i think you must be on a web subscription mode?
I havent been able to get any reliable live displays on any of my 4 cams 3xC310, +C200, even though each is on a separate network with own TPid and router and display. in 24hrs 1 or more will freeze, fortunately it appears to keep on recording to local memory AFAIK
for live video surveillance its totally unreliable
as it happens i now cant access my c200 on my mobile it say tap to refresh but doesnt YET I can see it on my pc through Ispy onvif
- Copy Link
- Report Inappropriate Content
Hi @Robintes
I'm not paying the TAPO Care Cloud Storage subscription: I have SD cards in each of my cameras and I use the Android mobile app to view them.
When the cameras are online (as seen via the mobile app), the live stream works OK for me.
My cameras do record when they are offline - though as I mentioned previously the timestamp on the recordings is often incorrect when they are offline.
Both cameras were working reliably last year. I think a firmware update (currently 1.1.16) may have introduced a problem which causes the cameras to lose their network connection, and the automatic daily reboot (scheduled via the mobile app) doesn't restore that connection.
However, as I know that the cameras lose track of the correct time when they are offline, I am wondering if the scheduled daily reboot actually is actually happening.
(The cameras are at a remote site, so I can't manually reboot them)
- Copy Link
- Report Inappropriate Content
Hello @Customer0
Thank you for more case details provided, may I know did you try some suggestions provided on #4 like change router DNS settings ?
To help locate the issue and fix it finally , please help save the camera log when the issue occurs again:
How to Get the Log of Tapo Camera?
Can I know did you recently changed any settings or update firmware for router;
How about the Led status when camera goes offline? At that time f connect mobile phone to home wifi network, it is still local only?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Robintes. Solved, had to swap out the camera and do a full factory reset. Then I had to go in and change the Account User name before it would load properly. So WHY did it lose my setting suddenly - I have no idea. I hope it doeant happen again
Tapo app has so many bugs its fraudulent. It also doesnt let you lower the frame rate from the default 15fps (clearly pushing its luck) I dont know how the streaming algorithm works but if your camera has too much activity - like moving the camera around live, then this freezes things, but this is abnormal operation of a cctv except if you had lots of people walking by say. BTW look at Trustpilot https://uk.trustpilot.com/review/tp-link.com 80% 1star of 400+ customers
- Copy Link
- Report Inappropriate Content
Hello @Robintes
Glad to know camera is now back after factory reset and reinstallation. When camera is offline, you may check if camera could be controlled locally or not, sometimes router's DNS somehow fails not resolve the request sent by camera, thus if camera is flashing green/ could be controlled locally when phone is connected to home Wi-Fi network (usually means connected to Wi-Fi but not connect to cloud service) we could try to change router DNS to another DNS server like Google DNS 8.8.8.8 for a try.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1639
Replies: 9
Voters 0
No one has voted for it yet.