TAPO C125 & C325 Brand new can only be controlled only locally

TAPO C125 & C325 Brand new can only be controlled only locally

TAPO C125 & C325 Brand new can only be controlled only locally
TAPO C125 & C325 Brand new can only be controlled only locally
a week ago - last edited Wednesday
Model: Tapo C125   Tapo C325WB  
Hardware Version: V1
Firmware Version: 1.2.3

Brand new out of the box camera can only be controlled only localy.

I have another two of them that are not connected yet.

I have tried all the steps including changing the DNS and with other WiFi network. It is the same

  0      
  0      
#1
Options
1 Accepted Solution
Re:TAPO C125 & C325 Brand new can only be controlled only locally-Solution
Wednesday - last edited Wednesday
Hi After I have logged out and logged in in the app all it is OK. We can close this thread.
Recommended Solution
  0  
  0  
#11
Options
11 Reply
Re:TAPO C125 & C325 Brand new can only be controlled only locally
a week ago
Are you using VPN?
ast
  0  
  0  
#2
Options
Re:TAPO C125 & C325 Brand new can only be controlled only locally
Sunday

  @astph No, I'm not using any VPN.

  0  
  0  
#3
Options
Re:TAPO C125 & C325 Brand new can only be controlled only locally
Monday

  @GabiMS 

Hi,
You can refer to the instructions below to troubleshoot the reported issue.
What to do if I can't control my Tapo cameras on the Tapo app?
 

If the problem remains, please confirm:
1. The model number of your wireless router.
2. The LED status on the camera when it can be controlled locally.
3. Send me(@Solla-topee) "Forum ID 716382+the MAC address of your camera" via a private message.
 

Best Regards

  0  
  0  
#4
Options
Re:TAPO C125 & C325 Brand new can only be controlled only locally
Monday

  @Solla-topee I have sent you the MAC address. DO I need to do this for all of my cameras? I have 4 of them.

  0  
  0  
#5
Options
Re:TAPO C125 & C325 Brand new can only be controlled only locally
Monday
Can you help me to add all other MAC addres?
  0  
  0  
#6
Options
Re:TAPO C125 & C325 Brand new can only be controlled only locally
Tuesday

  @GabiMS 

Hi,
Your four cameras are able to be controlled remotely according to the MAC address provided, and I didn't make any changes.

 

If you can't control your camera remotely, please check:
    1. Make sure your Tapo app is up to date.
    2. Try to use a different phone to control the camera.
    3. Try to connect your phone to a different Wi-Fi network or use another SIM card provider.
    4. Are the cameras displayed offline status on the Tapo app remotely?

 

Best Regards

  0  
  0  
#7
Options
Re:TAPO C125 & C325 Brand new can only be controlled only locally
Tuesday

  @Soll

I have attached 4 picture:

GMS_Cam1 - It is OK working locally and remotely,

GMS_Cam2 - It is NOT OK, can be controlled only locally.

Both cameras are side by side and are connected to the same Wifi network. Have almost the same settings and have identical HW version, and FIrmware.

I also attached a picture of the app when I'm connected localy to the Wifi and another one when I'm connected via 5G.

 

 

a-topee 

  0  
  0  
#8
Options
Re:TAPO C125 & C325 Brand new can only be controlled only locally
Tuesday
All the cameras are on the same Wifi and only one it is OK. Please let me know what are the next steps to investigate this?
  0  
  0  
#9
Options
Re:TAPO C125 & C325 Brand new can only be controlled only locally
Wednesday

  @GabiMS 

Hi,
I have escalated your case to the tech team, and they will follow up on your case via email. Please wait patiently.
Best Regards

  0  
  0  
#10
Options
Re:TAPO C125 & C325 Brand new can only be controlled only locally-Solution
Wednesday - last edited Wednesday
Hi After I have logged out and logged in in the app all it is OK. We can close this thread.
Recommended Solution
  0  
  0  
#11
Options