Smart Home Community > Tapo Smart Camera > ONVIF Motion detection broken C720
< Tapo Smart Camera

ONVIF Motion detection broken C720

ONVIF Motion detection broken C720

ONVIF Motion detection broken C720
ONVIF Motion detection broken C720
2 weeks ago
Tags: #Motion Detection #ONVIF/RTSP #Automation Tricks #HomeKit
Model: Tapo C720  
Hardware Version: V1
Firmware Version: 1.2.2

I'm using Scrypted to bring my camera into HKSV, but the motion recordings aren't working because motion events aren't firing in Scrypted via local ONVIF. The local ONVIF video streams are working, I can see both of them in VLC, and Scrypted and Homekit are also showing the stream.

 

Motion events are working fine in the Tapo app. 

In case it is important, I've blocked the camera IP from the internet and I've put an SD card in the camera. The date and time on the video timestamp are correct.

 

Thanks for any help or advice.

  1      
 
  1      
 
#1
Options
7 Reply
Re:ONVIF Motion detection broken C720
2 weeks ago

  @thebunk 

Hi,
Can you receive the motion detection notification on the VLC/iSpy app when the camera detects a motion?
Best Regards

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
  0  
  0  
#2
Options
Re:ONVIF Motion detection broken C720
2 weeks ago

  @Solla-topee How do I do that in VLC? I've searched around but don't see any instructions. I don't have iSpy. 

  0  
  0  
#3
Options
Re:ONVIF Motion detection broken C720
2 weeks ago

I have noticed a similar issue with motion notifications via ONVIF on my TC55 (which I think is identical to the C720), also firmware version 1.2.2. I also have an SD card in the camera and have blocked it from the internet.


Motion notification functionality appears to depend on whether the ONVIF consumer is set up to receive updates via PullPoint or Webhooks. My Scrypted setup uses PullPoint, and it receives general motion events, but not smart events (Person, Pet, etc).

 

I also have the camera integrated with Home Assistant, and that connection defaults to using Webhooks. Unfortunately, motion notifications do not seem to work at all via Webhook.

  0  
  0  
#4
Options
Re:ONVIF Motion detection broken C720
a week ago

  @adfooz  @thebunk  

Hi,
For the reported issue, please send me(@Solla-topee) the MAC address of your camera via a private message.
Best Regards

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
  0  
  0  
#5
Options
Re:ONVIF Motion detection broken C720
a week ago

  @Solla-topee I DM'd you my MAC address. Shout with anything else you need.

  0  
  0  
#6
Options
Re:ONVIF Motion detection broken C720
a week ago

@Solla-topee I have sent you mine as well. Thank you for looking into this!

  0  
  0  
#7
Options
Re:ONVIF Motion detection broken C720
a week ago

  @adfooz    @thebunk 

Hi,
Thank you for the information provided. I have escalated your case to the tech team for further analysis, and they will follow up on this case via email. Please wait patiently.
Best Regards

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
  1  
  1  
#8
Options

Information

Helpful: 1

Views: 232

Replies: 7

Tags

Motion Detection ONVIF/RTSP Automation Tricks HomeKit
Related Articles
ONVIF Motion detection broken
2240 6
Tapo C520WS ONVIF motion detection not working
5983 9
 ONVIF Motion Detection sensor not appearing
469 0
 Tapo C210 Onvif Motion Detection Not working
1210 0
Motion detection
500 0
Motion detection
774 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.