Smart Home Community > Tapo Smart Light Bulb > No bulbs will pair now
< Tapo Smart Light Bulb

No bulbs will pair now

No bulbs will pair now

No bulbs will pair now
No bulbs will pair now
a week ago - last edited a week ago
Tags: #Installation
Model: Tapo L530E  
Hardware Version:
Firmware Version:

Hi,

 

I have L630 x 4 and L530 x 2 that were on my system fine until we had a power cut where they all dropped off. 

I have tried a restart (3 switches) and this did nothing so have performed a factory reset. In the app, I can then join the bulb WiFi, join it to my WiFi and move to the screen where it states it is pairing but they never pair, none of the 5 will. 

I do have other bulbs and plugs and sensors etc all connected fine. 

Any ideas what I can do? Have tried a brand new bulb as well with no joy. 

 

I'll add that I have Omada AP's running my WiFi,  EAP670 and EAP610 meshed controlled by the Omada cloud. 

  0      
 
  0      
 
#1
Options
3 Reply
Re:No bulbs will pair now
Wednesday

  @McFly82 

 

Are there multiple SSIDs? Make sure your phone is connected to the same SSID as the light bulb during the setup. 

 

The smart bulbs supports 2.4GHz only. If the wifi is a combined network, try to disable 5GHz temporarily during the setup or split a dedicated 2.4GHz wifi for the smart devices.

▶ Landscape Mode - Tapo App for Pad ▶ Share Your Pet Story. Win Free Tapo Care! ▶ Smart Action 2.0 Explore and meet the next level home automation.
  0  
  0  
#2
Options
Re:No bulbs will pair now
Wednesday

  @Wayne-TP 

Only 1 SSID, it is both 2.4 and 5 as it was when I first joined these bulbs to the network before they fell off. I can try 2.4.

Only difference is one of the TP-Link access points is now attached by a mesh however four of the bulbs are almost 1 m away from the main access point that is hard wired and they have the same issue as the other bulb that would be on the meshed AP.

I have looked at the other posts that mention non-pairing and anything mentioned on them haven't helped either. I'm at a complete loss as to why befor the power cut these bulbs or new bulbs would join the network absolutely fine and now they all seem to fail. 

  0  
  0  
#3
Options
Re:No bulbs will pair now
Friday

  @McFly82 

 

The last time i checked, the smart bulb did not support mesh technology. You can also try to disable the mesh, roaming or other similar features, see if that helps. 

▶ Landscape Mode - Tapo App for Pad ▶ Share Your Pet Story. Win Free Tapo Care! ▶ Smart Action 2.0 Explore and meet the next level home automation.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 62

Replies: 3

Tags

Installation
Related Articles
unable to pair
497 0
Device won't pair
425 0
 L530E won't Pair
276 0
New bulbs in Tapo App
788 1
Colour Changing Bulbs Theme Effect
321 0
Custom colour presets when bulbs are controlled in 'groups'
145 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.