How to get an accurate monthly bill cost when it only accepts Pounds?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to get an accurate monthly bill cost when it only accepts Pounds?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to get an accurate monthly bill cost when it only accepts Pounds?
How to get an accurate monthly bill cost when it only accepts Pounds?
2024-12-16 23:28:26 - last edited 2025-01-13 01:54:38
Model: Tapo P110  
Hardware Version: V20
Firmware Version:

For some reason the P110 only accepts a minimum of a whole pound (UK Currency). Considering our current cost per kWh is around 23p (£0.23) I cannot get it to accurately give me the correct figure. Obviously putting 23 would mean its giving me a value consistent to £23 per kWh, and setting it as 0.23 gives me a flat reverse because its not correctly working it out. Anyone know of a fix, or a firmware patch that can correct this?

  0      
  0      
#1
Options
1 Accepted Solution
Re:How to get an accurate monthly bill cost when it only accepts Pounds?-Solution
2024-12-18 09:01:13 - last edited 2025-01-13 01:54:38

  @djoveryde 

 

Bill setting supports two decimal points. Make sure the device's firmware and the Tapo app are both updated then try to configure the bill settings again.

How to update the firmware of the Tapo devices on the Tapo App

Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual ModesTapo Camera Image Style & Image Brightness Try out a different image style for your camera!
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:How to get an accurate monthly bill cost when it only accepts Pounds?-Solution
2024-12-18 09:01:13 - last edited 2025-01-13 01:54:38

  @djoveryde 

 

Bill setting supports two decimal points. Make sure the device's firmware and the Tapo app are both updated then try to configure the bill settings again.

How to update the firmware of the Tapo devices on the Tapo App

Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual ModesTapo Camera Image Style & Image Brightness Try out a different image style for your camera!
Recommended Solution
  0  
  0  
#2
Options