The TC82KIT is the battery camera model that supports connecting to Wi-Fi directly, works with a solar panel, and offers a solar-powered solution providing flexible installation options. The same as Tapo C410 KIT, it does not need to work with a Hub.

Appearance of the TC82

Appearance of the TC82 KIT
 

 

Specification

It’s recommended to check the specifications of the TC82 KIT on the official website.
 

Installation

To install the TC82 KIT, please refer to the instructions here, and it introduced three mounting scenarios: 
1. Mount Solar Panel Only
2. Mount Solar Panel and Camera KIT
3. Mount Camera Only

 

Note: It's suggested to pay attention to the camera and solar panel mounting tips on the above instructions to have a better performance.
 

Highlights

 

Solar, Wire-Free: Place Anywhere with Ease.

Effortlessly monitor your space wirelessly from any location, liberating yourself from outlet limitations. Embrace hassle-free security with the solar panel, providing flexible installation options for a maintenance-free experience.

 

 

Superior 2K 3MP Visuals

Capture every detail in crystal-clear 2K resolution, with advanced algorithms ensuring perfect exposure day and night. 

 

Color Night Vision

See the night in vivid colors with the large aperture lens and built-in spotlights effective up to 30 feet (9m).

 

Built to Withstand Rain and Heat

TC82 KIT boasts an IP65 rating, ensuring dust and water resistance. It can withstand various harsh weather conditions, including rain, snow, dust, and bright sunshine, operating reliably in temperatures ranging from -4 to 113℉.

 

QA

Part 1. Basic Information

 

Q1: Can the battery of the TC82 be removed?
The battery cannot be removed, however, it can be used in conjunction with solar panels to provide continuous charging, eliminating the risk of running out of electricity.

 

Q2: How long is the charging cord for the Tapo A201 solar panel?
Charging cord length is 20cm/25cm, and can be extended with the 380 cm long A201 extension cord in the package.

 

Q3: Is a PIR sensor used by the camera?
Indeed, PIR sensors are used by the TC82 to sense movement and wake up. The PIR's effective awakening distance from the front is approximately 7-8 meters at maximum sensitivity. Please tilt the camera downwards at an angle of about 20°, the excessive tilt angle will cause a significant reduction in the PIR's effective distance.

Q4: Does the camera have to be connected to the router's Wi-Fi or the Hub?
The camera can only connect to the router's 2.4 GHz Wi-Fi and does not need Hub connections.

 

Part 2. Power Related

 

Q1: How long does it take for the solar panel to fully charge the camera?
The amount of sunshine has an impact on how long it takes to charge. If the solar panel is functioning properly and receives enough sunlight, it takes two to three days for the camera to fully charge when it is switched off.

 

Q2: How long can the camera work without utilizing a power source after it is fully charged?
Battery life of up to 180 days is based on TP-Link’s laboratory testing triggering 10–20 events per day. Actual battery life may vary based on device settings, use, and environmental factors.

Note:
It is not suggested to direct the camera to the street, road, or other regions that cause the camera to wake up frequently since this would significantly drain the battery's capacity. Please see this article for information on how to extend the battery life.
 

Q3: How long can the camera work with the Tapo A201 solar panel connected when it's raining or cloudy outside?
The solar panel is essentially unable to collect solar energy to power the camera on rainy days. Depending on the amount of light, how often the camera wakes up, and other factors, it varies on cloudy days.

 

Q4: Aside from the Tapo A201 solar panel, can other solar panels or USB charging devices be used to charge the camera?
Tc82 can be powered by USB Type-C charging devices and solar panels with a regulated 5V output. With a 5V1A USB adapter, the TC82 takes 7.5 hours to charge from 0% to 100%.

Note：
We always recommend using our official device for charging. If you use a third-party solar panel or charging device, we cannot guarantee waterproof performance. The charging time data is from the laboratory, actual times may vary.

 

Part 3. Video Related

 

Q1: Does the camera support ONVIF or RTSP?
RTSP and ONVIF are not supported by the TC82.

 

Q2: Is it possible for the camera to record continuously?
No, even with an SD card inserted, the camera is not able to record continually. Continuous recording consumes power quickly and will require you to charge the battery frequently. We recommend purchasing a non-battery model if you want to record continuously.

 

Q3: Is it possible for the camera to capture video even when it isn't connected to the internet?
Yes, the camera can continue to record video to the SD card even when it is not connected to the internet.

 

Where to Buy

The release condition can differ between countries and areas, and it is suggested to check if this model is available on the local TP-Link website first. If so, go to Where to Buy to search for 'TC82 KIT' or 'TC82' in the local stores or online shops.
 

More Articles:

Tapo C410KIT: Solar-Powered Security Camera Kit
Tapo C425: Wire-Free, Battery-Powered Wi-Fi Security Camera for Outdoors and Indoors
TP-Link First Solar Panel Tapo A200 Being Released