C100 and C310 does sometimes not stop recording
Hello
I have two different cameras C100+C310 + SD Card (Two different cards) since 1 Year now.
The recording is adjusted to record the whole day with motion detection.
This works fine, but sometimes it happens (1 time / month) with both cameras that the record does not stop automatically after a motion detection.
Then i got a record with hours and this will only stop when i do a reebot.
Sometimes its once a month, sometime its happens every two months. Sometime on the C100 and sometime at the C310. Tptally different.....
Both Cams have the latest update and of course i check the record plan. Factory reset was also done.
Some idea what causes this problem??
Thanks
Thanks for your reply
Attached are the Informations.
Yesterday it starts recording at 5:40 because of my cat. She came in and go out of the room. The record was running about 4 hours till i stoped it by hand.
The Scheduler is configured at both cams for 24hrs and also both cams have 64gb Sd card installed. One Transcend 64gb (picture) and a SanDisk 64gb.
In this cam is the Transcend build in.
As this happens only once a "month" (only a feel) It could not be an wrong adjustment.
Hope this will help
Many thanks
Hello,
today it happens again.
This time it was a llittle bit different.
At 13:26 it starts recording, and record about 20 minutes.
"After" about 20 minutes, another event happens and this has stopped the recording after 1,5 minutes....
I have attached the record log which you want.
Thanks
