L630 Unwanted reset due to on/off switch

L630 Unwanted reset due to on/off switch

L630 Unwanted reset due to on/off switch
L630 Unwanted reset due to on/off switch
2024-10-16 08:37:05 - last edited 2024-11-22 10:00:14
Model: Tapo L630  
Hardware Version: V1
Firmware Version: 1.1.1 Build 240621 Rel. 160629

Dear support,

 

It is very easy to trigger soft reset for the L630 lights with the 3 times on/off cycle. 

 

Due to this in our house where we have more than 50 L630 lights almost very week I have to add the lights back in the app. the guests and the family members are pushing sometimes more then 3 times the on/off switch by mistake...

 

Can you please make the soft reset process with a more complex trigger?  for example to increase the reset trigger from 3 to 5 or more on/offs...

 

 

thx

 

Mihai

 

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:L630 Unwanted reset due to on/off switch -Solution
2024-10-17 06:18:08 - last edited 2024-11-22 10:00:14

  @MihaiOros 

 

Performing a soft reset on the bulb requires turning it on and off three times in quick succession, that is totaling six on-off cycles, with each on-off interval limited to about 1 second. This reset method can be quite complex for most users.

 

If the bulb in your home is likely to be switched on and off six times in a short period, the actual number of such repeated operations may be even higher. I think that even if the reset rule requires more cycles, it wouldn’t significantly reduce the risk of the bulb being reset in your home.

 

I recommend considering a smart switch to control regular bulbs instead.

 

Or you may post a Feature Request thread for this topic, if any user shares the same thoughts, they can vote for your post and join the discussion. The product team will review and evaluate user feedback regularly. Hot topics will be prioritized for evaluation.

Landscape Mode - Tapo App for PadShare Your Pet Story. Win Free Tapo Care!Smart Action 2.0 Explore and meet the next level home automation.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:L630 Unwanted reset due to on/off switch -Solution
2024-10-17 06:18:08 - last edited 2024-11-22 10:00:14

  @MihaiOros 

 

Performing a soft reset on the bulb requires turning it on and off three times in quick succession, that is totaling six on-off cycles, with each on-off interval limited to about 1 second. This reset method can be quite complex for most users.

 

If the bulb in your home is likely to be switched on and off six times in a short period, the actual number of such repeated operations may be even higher. I think that even if the reset rule requires more cycles, it wouldn’t significantly reduce the risk of the bulb being reset in your home.

 

I recommend considering a smart switch to control regular bulbs instead.

 

Or you may post a Feature Request thread for this topic, if any user shares the same thoughts, they can vote for your post and join the discussion. The product team will review and evaluate user feedback regularly. Hot topics will be prioritized for evaluation.

Landscape Mode - Tapo App for PadShare Your Pet Story. Win Free Tapo Care!Smart Action 2.0 Explore and meet the next level home automation.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 155

Replies: 1

Related Articles