@Incandescent1 Given that all three are incidentally at 90 Mbps, which is just shy of the speed of a 100 Mbps Ethernet link, you might want to check the link speed of the Ethernet connection between...

sarfarajsr1 wrote I Can't Find "Bandwidth Control/QoS" Option In Webpage Firmware. @sarfarajsr1 Hi, The QoS option should be inside the "HomeShield" menu.

@Gally Hi, If you mean you see a Wi-Fi network named "TP-Link_Extender" and upon trying to connect to it you are told the connection is not secure, then this is normal. And it would also mean the...

@stepet That means there is no driver loaded. Have you already re-plugged or rebooted Linux since you installed the driver? If not, then please see if that changes anything. Other than that you could...

@stepet Please also run the command lsusb -t to check if the driver is loaded for Bus 001 Device 007. (i.e. "Driver=aic8800_fdrv")

@stepet Please look up the device "ID" of the TP-Link AX300 by using the lsusb command and post it here. If your AX300 is not shown as "AICSemi AIC8800DC", then try to find out which one of the...