terziyskiLV7Online
Following: 0Followers: 42
Forums/ Mobile Wi-Fi
2025-06-03 20:19:34
Re:M7650 boot loop after firmware update failure
@TYeE No, don't try with the FW for M7350. I pointed you to a wrong thread - try this thread suggestions instead.
0HELPFULS
Forums/ Mobile Wi-Fi
2025-06-03 18:50:12
Re:M7650 boot loop after firmware update failure
@TYeE Refer to this thread for troubleshooting such an issue.
0HELPFULS
Forums/ DSL Modem Routers
2025-06-03 18:44:59
Re:TP-Link TC-W7960 Router Login Not Working After Firmware Update – Need Assistance
@MaryBrown If your cable modem is model TC-W7960 its default login should be at http://tplinkmodem.net or http://192.168.1.1 as it was mentioned in its user guide.
1HELPFULS
Forums/ Wi-Fi Routers
2025-06-03 08:11:38
Re:Easy Mesh question with my setup
@Buckchucko This won't work the way you describe it. That's because when using the RE705X LAN port for a backhaul it should be configured in AP mode. If RE70X is in AP mode you can't have an Easymesh...
2HELPFULS
Forums/ Wi-Fi Routers
2025-06-02 20:13:13
Re:TPLINK LAN speed defaults to 100/100 after PC is turned off
@YeehawWeewoo " I have set the negotiation to 1000 and I can get 1000/1000 out of it. " This setting is only for the WAN (Internet) port: If the LAN port speed is 100mbps instead of 1000mbps, try...
1HELPFULS
Forums/ Wi-Fi Routers
2025-06-02 19:03:39
Re:TPLINK LAN speed defaults to 100/100 after PC is turned off
@YeehawWeewoo So you have this issue with the WAN port, but your PC is connected to a router LAN port, correct ? If the problem is with the WAN port then you can only test with another cable.Normally...
0HELPFULS
1394041...