@CryptoWizard Yes, there are PoE splitters that can power the TL-WA1201 from a IEEE802.3 af/at 48V PoE switch. It will power the TL-WA1201 with 12v/2A and connect to its gigabit ethernet port: This...

@R_U_N That is not possible because C6 HW v3.20 doesn't support Easymesh technology currently. You could use you C6 HW v3.20 as a range extender (through its WDS feature) or in AP mode (Case 1),...

@Raschl If understand your inquiry correctly - you want the PLC SSID to be different than your router SSID. Lets take for example TL-WPA7517 KIT: You can name your wireless PLC SSID whatever you want.

@AmdrewM You just have to replicate you Hub 3 network setting on the Hub 5 and keep the Deco setup as is. In general: if the HUb 5 is in router mode then your Deco setup should be in AP mode to avoid...

@Sallomy Make sure that you have updated Deco APP to the latest version for the new features - restart the app. If you have any other Deco model other than X20 in your setup, this may be the reason....

@NicolaThomas Here's how to configure TL-WA801N in access point mode. Here's what should you do to troubleshoot if you fail to configure the AP.