TroubleshootingArcher BE550v1 Wireless Clients Lose Internet in AP Mode After 1.1.3 Firmware Upgrade
The Article Applies to: Archer BE550v1 1.1.3 Build 20250421 rel.24697 (Official Firmware (AP Mode)) Please note, this issue only affects the BE550v1 while operating in AP mode; the behavior was not pr
3Helpful
2557Views
The contents of this article will first be updated in the initially posted thread by Kevin_Z in Introducing AI QoS: Elevate Your Gaming Experience on the Archer GE800 Gaming Router! For the latest upd
Wi-Fi 7Bandwidth Control/QoS
0Helpful
3059Views
Beta SoftwareBE230/BE3600: After Connecting to WireGuard VPN, Backend Client is Unable to Access the Internet
This Article Applies to: Archer BE230 V1/V1.2, Archer BE3600 V1.26/V1.6 Issue Description/Phenomenon: When the router turns on the VPN Client function and connects to the Wireguard VPN, the wireless c
Firmware Update
0Helpful
1970Views
Hey TP-Link Community, We have received feedback from several users indicating that iOS devices such as iPhones and iPads are experiencing a "connected but no internet" behavior, specifically when con
Wi-Fi 7OfficialFirmware Update
7Helpful
4053Views
[2025 Update] [Guide] My New Router is Not Obtaining an IP Address from My Cable Modem Setting up a new router should be a straightforward process, but many users encounter a frustrating issue: after
84Helpful
105809Views
We often receive questions relating to the setup, recommended configurations, and compatibility of TP-Link devices with a Starlink Network. Archer Routers, Access Points, Range Extenders, and Deco Mes
2Helpful
33233Views
Hello... We have been using an AX5400 for about a year, without any problems. It's WAN port is cabled to our ISP's modem. I purchased a second AX5400, intending to configure it in bridge mode, connect
Access Point ModeBridge Mode
By
LowLatency
0Helpful
33Views
Hello, Problem: I recently upgraded to an Archer BE400 router. Initially it works fine with all devices, however after a day or so multiple devices will disconnect and remain disconnected, throwing an
Wi-Fi 7Access ControlPort ForwardingConnection Problems
By
Topshelf96
· Latest post Yesterday
by ArcherC8
0Helpful
41Views
I just realized this BE800 works so badly on reboots. E.g. last time I realized it somehow lost my IoT network's password (SSID was ok) and no IoT devices were able to connect until I fixed the passwo
By
demonstrate
· Latest post Friday
by DVair
1Helpful
93Views
After multiple attempts and copying the password from the back of my router, I'm unable to connect to it. It always gives me incorrect password. Suggestions? Thanks!
Wi-Fi 6E
By
DaveBHastings
· Latest post Friday
by Joseph-TP
0Helpful
81Views