Mixing XE75 Pro and XE75/BE63, missing OFDMA/MU-MIMO settings
I recently added an XE75 satellite node to my already existing 2-node XE75 Pro mesh network, and it has caused the OFDMA/MU-MIMO settings to disappear. Likewise, if I unplug the power to the XE75 node the settings show up again.
Since I am using the XE75 node for wireless-only communication, I had thought it would act identical to the XE75 Pro nodes, as the only documented difference is the missing 2.5gbps port. Instead, something weird seems to be going on with the mixing of the two different device types.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Exactly the same here! Difference is that I added a X50 (1 unit) to the existing XE75 mesh (3 units).
The XE75 are all connected between them by wire and added the X50 through wireless to improve coverage.
Had the same problem before with v1.2.8 and was hopping that v1.2.9 would solve, which was not the case....
- Copy Link
- Report Inappropriate Content
Any feedback from tp link experts here in the forum?
Anyone?
Thank you
- Copy Link
- Report Inappropriate Content
I discovered something new. I returned my XE75, and instead purchase the new BE63 to become my new primary unit. The same problem exists with OFDMA and MU-MIMO settings being absent. So this issue appears to involve any sort of mixing of devices families, not just the XE75 and XE75 Pro models.
- Copy Link
- Report Inappropriate Content
Exactly!
In my case, I'm mixing the (x3) Deco xe75 with a (x1) Deco x50
Would be great if someone from TP-LINK give us a heads up on what's going on.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Same here. XE75 and XE75 pro mix. I used to have XE75 and X90 and it showed up with that setup.
- Copy Link
- Report Inappropriate Content
Another update, I returned my XE75 and instead bought a BE63 to become my new primary node, and I have the exact same issue. Mixing XE75 Pro and BE63 units results in having OFDMA/MU-MIMO settings missing.
- Copy Link
- Report Inappropriate Content
Any solution found. Would be great it tech support would say something....
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 6
Views: 1278
Replies: 32
Voters 1
