This Article Applied to

Deco X50/X55_V1(V1.6) only

Note: Deco X50/X55_V1.2/V1.3 can't install this version. Nor did Deco X50-outdoor/Deco X50-POE.

 

 

Firmware Download Link

 

Deco X50/X55_V1.6

1.6.0_build_20240903_Beta

Newly updated to Deco 1.12.0 Firmware Platform

 

Update Advice:
1. Please make sure the Deco APP is up-to-date.
2. How to manually update the firmware via web UI- How to Update the Firmware of Deco.
3. The firmware downgrade needs to be through Firmware Recovery-How to Downgrade Deco.

 

 

 

Modifications and Improvement

1. Support Internet Backup via Hotspot Backup and Hybrid-Mesh Backup Mode.
2. Added DoH/DoT under Deco APP>More>Advanced.
3. Support 20MHz/40MHz automatic bandwidth selection to enhanced 2.4GHz WiFi performance.

Note: Some features are not supported in Access Point mode.

 

 

Deco Internet Backup Feature Guide

 

Internet Backup keeps the Deco Mesh system always online by switching to a backup network when the original ISP network is disconnected to ensure constant internet access. There are 3 backup modes available and only one mode can be enabled at a time.

 

How to enable Internet Backup

• Open your Deco app, and go to More > Advanced >Internet Backup.
• or Go to More > Internet Connection > Internet Backup.

 

 

Hotspot Backup Mode

Allow Deco to connect to a hotspot backup network wirelessly, like your mobile hotspot, or other secured wireless networks nearby.

 

How to enable Hotspot Backup Mode

1. Set a fixed WAN port

2. Select a nearby hotspot for network backup.

3. (Optional) Edit the Advanced Hotspot Backup settings

• Add multiple wireless networks to the Hotspot List.

• Set Speed Limit and Access Permission.

 

 

Both 4G/5G Backup and Hybrid Mesh Backup Modes require having an extra Deco 4G/5G model in the Mesh system, such as Deco X50-5G.

4G/5G Backup Mode

The Deco 4G/5G model is set as the main Deco and works in wireless router mode. Actually, this Internet Backup method is not dedicated to the Deco X50/X55_1.6.0 firmware and many Deco 4G/5G routers already support this feature.
For more details, please refer to How to set up 3G/4G or 4G/5G Backup on Deco router.

 

 

 

Hybrid Mesh Backup Mode

The Deco 4G/5G model is set as the satellite Deco and works in wireless router mode. It is very useful when Deco X50 is the main Deco and Deco X50-5G is added as the satellite unit. After the primary network is restored, Deco will automatically switch back to the ISP cable service.

 

 

How to enable Hybrid Mesh Backup Mode

1. Set a fixed WAN port under More > Advanced > WAN Port.
2. Configure 4G/5G Backup settings