Excited to see this update trickle down to the BE550 Pro! 

Will test if/when this becomes available. 

An option to set 5ghz WiFi channel width below 80mhz would nice. Like allowing to select 20mhz or 20/40mhz.

  @Ryan 

Since this release was AUTOUPDATED in my Archer BE550, the router does not have internet connection. Every morning, I wake up without internet. I have to basically unplug the device, wait 30 secs and then plug it back in order to connect. Three days in a row. Previous to it, everything worked flawlessly.

I had it scheduled reboot daily at 3:00 a.m. Yesterday, I changed it to once a week. This morning I woke up again with no internet connection (hard wired and wireless).

Please advise on a solution.

Thanks,

Balperro

  @Ryan Thank you for your prompt response.

I will disable the shedule reboot and report back. As I mentioned before, I had it scheduled for daily at 3:00 a.m. and it was working flawlessly for months. Never had an issue.

When the first night I woke up with no internet, I first checked the fiber modem. All lights were blinking as normal. Check downdetector website. No issues. Then went to the router and all front lights were off. No LED lights at all, so I thought my UPS was off, but I immediately realized that was not the case, since the modem was up and running. Then, I proceeded to disconnect the router. Waited 30 secs. Plug it back in. After a few minutes, everything was running with no issues. Went to work, monitored internet access remotely, no issues. Got home later tthat day, kids were working normal on their computers, no complaints. I worked until 9:30 p.m. the onlly thing I changed was the reboot to weekly. No issues. Went to bed only to wake up with no internet again. Checked everything again, router LEDs were off. Unplugged it and all that. Back in action. Went to work, same routine. No issues. Came home same thing. Woke up next day. No internet. No LEDs on. This time, I did not unplugged it, just turn it off. Turn it on almost immediately. Back in action after a few minuntes. Tonight I will disable schedule reboot. 

I also changed VPN server and see if this is causing the issue. Using Wireguard VPN through NordVPN new autosettings. I have been using these different VPN servers since I bought the router.

I apologize for the long response.

Thanks again!

Balperro 

  @Ryan 

Hello,

I hope you had a safe and good Easter.

I would like to report that the disconnection issue was indeed related to the Archer BE550_V1/V1.6_1.1.2 Build 20250317.

I downgraded to the 2024 firmware and ALL issues went away. I disable the Autoupdate feature of the router to avoid falling for it again.

I will wait until a new release comes out and shows that it is safe to update.

Cheers.

Balperro