Home Network Community > All Threads > Archer CR700 loses bridge mode setup on power cycle
< All Threads

Archer CR700 loses bridge mode setup on power cycle

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer CR700 loses bridge mode setup on power cycle

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer CR700 loses bridge mode setup on power cycle
Archer CR700 loses bridge mode setup on power cycle
2022-12-04 22:56:30
Model: Archer CR700  
Hardware Version: V1
Firmware Version: v1.1.0 Build 20170314 Rel542320

I setup my Archer CR700 in bridge mode and it works great.   However, when it gets power cycled (power has gone off in the house a couple of times), it loses the setting and reverts back to router mode.   When I set to bridge mode, I do hit save and it reboots into bridge mode.   Just seems to be when power is cycled does it revert back to router mode.   Inquiring minds would like to know what to do?

  0      
 
  0      
 
#1
Options
4 Reply
Re:Archer CR700 loses bridge mode setup on power cycle
2022-12-05 18:21:09

  @mdo0911,

Are you able to recreate the behavior every time the router is power cycled? Or is it a random occurrence? Does Rebooting the Device from the menu break the bridge mode functionality?

 

If the behavior only occurs during a power outage, the router may be behaving this way due to the rest of the network being disconnected and trying to reconfigure itself to provide a connection. 

Check out the Latest: Getting Started with EasyMesh and TP-Link New Tablet Mode for the Tapo App Comparing the Latest Tapo Doorbells
  0  
  0  
#2
Options
Re:Archer CR700 loses bridge mode setup on power cycle
2022-12-06 00:42:48

  @mdo0911 I can reproduce the problem by pulling the power cable.  Rebooting via the CR700 menu does not cause the problem, only losing power.

  0  
  0  
#3
Options
Re:Archer CR700 loses bridge mode setup on power cycle
2022-12-09 02:10:52

  @Riley_S  I can reproduce the problem by pulling the power cable.  Rebooting via the CR700 menu does not cause the problem, only losing power.

  0  
  0  
#4
Options
Re:Archer CR700 loses bridge mode setup on power cycle
2022-12-20 19:55:41 - last edited 2022-12-20 20:10:10

  @mdo0911,

Would it be possible for you to create a system log from the WebUI of your modem? The logs may indicate why the configuration was lost, such as having to recover from a critical error. I also just posted a beta firmware for routers that are experiencing a similar behavior, I would imagine that this means that fixes will be released after the beta firmware for these devices is finalized.

Check out the Latest: Getting Started with EasyMesh and TP-Link New Tablet Mode for the Tapo App Comparing the Latest Tapo Doorbells
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 649

Replies: 4

Related Articles
Bridge Mode for Archer C5400
4706 0
Archer C9 Bridge mode
2434 0
Archer CR700 not showing all folders in Network Attached Device
1780 0
Do not understand some of how to enable bridge mode in Archer C8
2654 0
Deco M5 Installation in BRIDGE mode
17532 0
AX10000 Bridge Mode?
941 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.