Access point and net configuration

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Access point and net configuration

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Access point and net configuration
Access point and net configuration
2023-07-12 07:03:37 - last edited 2023-07-12 08:16:55
Model: Deco E4  
Hardware Version: V1
Firmware Version: 1.5.4

Hello everyone, looking at the official site, the recommended configuration for Access Point mode is as follows:

 

ead6edffe34546ae9af9fc418bc13f26

 

 

 

however, I need to integrate a switch into my home network and I configured my network as shown:

 

c055effcecbf4bd18b1f9c0fc6d5266b

 

 

in the app, however, the connection diagram makes me wonder: it seems that the connection is in router mode:

 

ace0e66a30b8472db43fb9940659fc64

 

should not the pattern be linear?
Should not it be from the main deco to the second deco and finally to the third like in the first picture I posted?

 

thanks

  0      
  0      
#1
Options
1 Reply
Re:Access point and net configuration
2023-07-13 06:42:09

  @cl-7k-01 

Hi, the studio Deco is supposed to connect to Zona notte and but for some reason, it didn't. 

Please refer to the following suggestions to see whether they helped:

1. run network optimization once on Deco APP>More.

2. Move the studio Deco away towards the opposite direction of the main Deco.

 

Thank you very much.

Best regards.

  0  
  0  
#2
Options