Smart Home Community > Kasa Cameras > KD110 Doorbell doesn't send a notification when button pressed.
< Kasa Cameras

KD110 Doorbell doesn't send a notification when button pressed.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

KD110 Doorbell doesn't send a notification when button pressed.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
KD110 Doorbell doesn't send a notification when button pressed.
KD110 Doorbell doesn't send a notification when button pressed.
2023-08-17 06:46:50 - last edited 2023-08-22 03:22:11
Model: KD110  
Hardware Version: V4
Firmware Version: 2.3.18

Hello!

 

I have had the Doorbell for about 3 months now and it has functioned in all respects, except one. 

 

The Chime and Camera are working perfectly.  The camera and KASA app will send notifications when it detects a person just fine, but not when the button is pressed. The toggle for button pressed notifications is toggled on. I have tried toggling it on and off and on again. I have also tried powering off the camera and then back on again. 

 

 

So, while the camera will send a notification when it detects a person approaching the door, if will not send a notification if they ring the doorbell. I have also tried pressing the button without being detected but the camera (from inside the house), but it will not send a notification. 

 

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:KD110 Doorbell doesn't send a notification when button pressed. -Solution
2023-08-21 11:10:32 - last edited 2023-08-22 03:22:11

  @J_Shaw 

Hi,
The new firmware for the KD110 is rolled out today for all KD110, please try to update the firmware and check if it will solve the issue. If you do not see the new firmware, reboot the KD100 for a try.
Best Regards

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
Recommended Solution
  0  
  0  
#4
Options
5 Reply
Re:KD110 Doorbell doesn't send a notification when button pressed.
2023-08-18 05:44:19

  @J_Shaw 

Hi,
We are releasing new firmware(2.3.20) for the KD110 gradually, please update the firmware to the latest one if the firmware is available for your device, and check if it helps.
How to update firmware of Kasa smart devices?
 

If don't see the new firmware on the Kasa app, please send me the MAC address of your KD110 via private message, and we can send the firmware to your camera for a try.

 

Do you have this problem when starting to use the camera?

 

Best Regards

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
  0  
  0  
#2
Options
Re:KD110 Doorbell doesn't send a notification when button pressed.
2023-08-18 23:33:17
Oddly enough, not many people actually press the doorbell button, so I haven't paid much attention to if it ever sent a notification or not, but I seem to remember it sending notifications at least once or twice when I first installed it. I don't currently see a firmware update available yet.
  0  
  0  
#3
Options
Re:KD110 Doorbell doesn't send a notification when button pressed. -Solution
2023-08-21 11:10:32 - last edited 2023-08-22 03:22:11

  @J_Shaw 

Hi,
The new firmware for the KD110 is rolled out today for all KD110, please try to update the firmware and check if it will solve the issue. If you do not see the new firmware, reboot the KD100 for a try.
Best Regards

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
Recommended Solution
  0  
  0  
#4
Options
Re:KD110 Doorbell doesn't send a notification when button pressed.
2023-08-22 03:21:19
I received the firmware update and it was installed. My doorbell will send notifications when the button is pressed now. I tried it once in the morning and tested again in the evening. It triggered a notification both times within a few seconds. Thank you 😀
  0  
  0  
#5
Options
Re:KD110 Doorbell doesn't send a notification when button pressed.
2023-08-23 11:12:52

  @J_Shaw  Glad to hear that the new firmware has solved your issue~smiley

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 886

Replies: 5

Related Articles
 KD110 Doorbell Sharing
237 0
KD110 doorbell camera person detection not respecting activity zones
1109 0
 Kasa KD110 Doorbell Chime does not pair
352 0
 Kasa Doorbell - Specific Doorbell Notification for Android App
2278 3
 Introducing the Kasa Smart KD110 Video Doorbell
4022 1
 KD110 Doorbell Ring Chime with Motion or Person Detected
363 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.