KS230 Blinks red after firmware update (not working anymore)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

KS230 Blinks red after firmware update (not working anymore)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
KS230 Blinks red after firmware update (not working anymore)
KS230 Blinks red after firmware update (not working anymore)
2021-12-30 20:36:23 - last edited 2022-01-04 02:18:33
Model: KS230 KIT  
Hardware Version: V1
Firmware Version: 1.0.12

Just updated the KS230, wifi keeps blinking red. Still shows connected to Wifi but both switches don't work anymore... lights will not turn on

 

put back the old 3 way dimmer and works fine

 

I tried resetting to factory but still blinks red. All other switches at home are Ok

 

Any idea?

  0      
  0      
#1
Options
2 Accepted Solutions
Re:KS230 Blinks red after firmware update (not working anymore)-Solution
2021-12-31 01:45:45 - last edited 2022-04-14 03:26:18

Hello everyone, 

 

1. If KS230 Flashing Red after first installation, refer to topic here KS230: blinking red, correctly wired 

2. If  KS230 Flashing Red after 1.0.12 firmware update:

 

Case 1: If KS230 could still control light manually

  • Try a factory reset on switch by pressing the 'reset' button (the button on the left button, not the Reboot button) on main KS230 for 10 secs, check if switch broadcasts 'TP-Link_Smart_Switch_XX'  SSID or if Led will flash amber and green. If so, try to set up switch in Kasa app again.

If installation failed in Kasa step, try to troubleshoot as this FAQ: What should I do if I fail to configure the Kasa device?

 

Case2: KS230 can Not manually control the light & KS230 appears ' Online' on Kasa APP / KS230  still gets an  IP address

  • Check if device appears 'Online' or looks usual on Kasa app (kasa app can't control switch)
  • Check router (DHCP ) client list and see if KS230 is still getting an IP address
  • If KS230 has an IP or  appears ' Online‘ on Kasa App, refer to Guide here to downgrade firmware 

1. connect a Windows PC to the same network with the device.  (So far Windows computer required*  )
2 . Downgrade the firmware :download beta firmware update tool and refer instructions in the same link to downgrade
https://static.tp-link.com/upload/beta/2021/202112/20211227/Upgrade_Instruction_KS230(US)1.0_downgrade_to_FW1.0.10.zip

Note:  Please review Terms and Conditions for TP-Link Beta Firmware before try this beta firmware
 

if still the same issue , kindly help confirm details below and email to <support.forum@tp-link>  with title ' [Forum ID 517622  ] + Model + Description ' or and we will have a specialist to look into your case further. 
1. Could you manually control light using main & satellite KS230?
2. Could you use Kasa APP to control light using main & satellite KS230? 
3. Does the LED status look usual on main and Satellite KS230? the Brightness Led/ Ring/ WiFi led.
4. Is KS230 still connected to Wi-Fi or is KS230 still on router client list and gets an IP address

 

Thank you.

Recommended Solution
  1  
  1  
#2
Options
Re:KS230 Blinks red after firmware update (not working anymore)-Solution
2022-01-04 02:18:26 - last edited 2022-01-04 02:18:33

@Superman54 

 

here ya go guys;

 

Can you see tp-link smart switch still gets an IP address on router client list or if KS230 still connects to WiFi, if so
Please try to downgrade current firmware and see if that helps 
https://static.tp-link.com/upload/beta/2021/202112/20211227/Upgrade_Instruction_KS230(US)1.0_downgrade_to_FW1.0.10.zip
 
Keep me posted
Recommended Solution
  5  
  5  
#9
Options
15 Reply
Re:KS230 Blinks red after firmware update (not working anymore)-Solution
2021-12-31 01:45:45 - last edited 2022-04-14 03:26:18

Hello everyone, 

 

1. If KS230 Flashing Red after first installation, refer to topic here KS230: blinking red, correctly wired 

2. If  KS230 Flashing Red after 1.0.12 firmware update:

 

Case 1: If KS230 could still control light manually

  • Try a factory reset on switch by pressing the 'reset' button (the button on the left button, not the Reboot button) on main KS230 for 10 secs, check if switch broadcasts 'TP-Link_Smart_Switch_XX'  SSID or if Led will flash amber and green. If so, try to set up switch in Kasa app again.

If installation failed in Kasa step, try to troubleshoot as this FAQ: What should I do if I fail to configure the Kasa device?

 

Case2: KS230 can Not manually control the light & KS230 appears ' Online' on Kasa APP / KS230  still gets an  IP address

  • Check if device appears 'Online' or looks usual on Kasa app (kasa app can't control switch)
  • Check router (DHCP ) client list and see if KS230 is still getting an IP address
  • If KS230 has an IP or  appears ' Online‘ on Kasa App, refer to Guide here to downgrade firmware 

1. connect a Windows PC to the same network with the device.  (So far Windows computer required*  )
2 . Downgrade the firmware :download beta firmware update tool and refer instructions in the same link to downgrade
https://static.tp-link.com/upload/beta/2021/202112/20211227/Upgrade_Instruction_KS230(US)1.0_downgrade_to_FW1.0.10.zip

Note:  Please review Terms and Conditions for TP-Link Beta Firmware before try this beta firmware
 

if still the same issue , kindly help confirm details below and email to <support.forum@tp-link>  with title ' [Forum ID 517622  ] + Model + Description ' or and we will have a specialist to look into your case further. 
1. Could you manually control light using main & satellite KS230?
2. Could you use Kasa APP to control light using main & satellite KS230? 
3. Does the LED status look usual on main and Satellite KS230? the Brightness Led/ Ring/ WiFi led.
4. Is KS230 still connected to Wi-Fi or is KS230 still on router client list and gets an IP address

 

Thank you.

Recommended Solution
  1  
  1  
#2
Options
Re:KS230 Blinks red after firmware update (not working anymore)
2022-01-02 01:48:25

I can confirm I am having the same exact issue. Looks like a firmware update last night and then a blinking red main switch all day today. Neither the main or remote switch have any effect on the lights when pressed.

 

I've tried the factory reset and restart procedures multiple times. I went a step further and turned the breaker off to remove power altogether. When I turn the breaker back on, I see the lights come on for a split second and then turn off right away. During this split second, the wifi indicator light on the switch goes from orange to green once and then back to blinking red.

 

Still no lights whatsoever. As best as I can tell, the firmware update took my KS230 switched out.

  3  
  3  
#3
Options
Re:KS230 Blinks red after firmware update (not working anymore)
2022-01-02 02:09:46

@jivegajr 

 

I did the downgrade back to 1.0.10 and everything is fine

 

When I tried updating again to new firmware 1.0.12, it says that red blink means that Traveler 1 and 2 are not ok, but mine do are. 
 

You should get the downgrade, did fix everything for me

  0  
  0  
#4
Options
Re:KS230 Blinks red after firmware update (not working anymore)
2022-01-02 04:26:54

@PHATMartz 

 

Thanks for the reassurance on that. Glad to hear you're back up. I did email support at the address they provided you on their response to your original post. Hopefully, the downgrade comes through soon!

  0  
  0  
#5
Options
Re:KS230 Blinks red after firmware update (not working anymore)
2022-01-04 01:12:23 - last edited 2022-01-04 01:16:07

@Solla-topee 
 

Having the exact same issue with KS230 KIT. Please let me know how to downgrade. Cannot control lights manually anymore, blinking red constantly after restarts and reset.

  0  
  0  
#6
Options
Re:KS230 Blinks red after firmware update (not working anymore)
2022-01-04 01:14:22 - last edited 2022-01-04 01:15:34

@jivegajr @PHATMartz 
 

Please keep us updated. Exact same issue to the dot as all of you since yesterday.

  0  
  0  
#7
Options
Re:KS230 Blinks red after firmware update (not working anymore)
2022-01-04 01:53:56

@PHATMartz 

 

Can I ask how you did the firmware downgrade?  I also sent a response to the support email, but these lights are in my kitchen so I really need them working!

  0  
  0  
#8
Options
Re:KS230 Blinks red after firmware update (not working anymore)-Solution
2022-01-04 02:18:26 - last edited 2022-01-04 02:18:33

@Superman54 

 

here ya go guys;

 

Can you see tp-link smart switch still gets an IP address on router client list or if KS230 still connects to WiFi, if so
Please try to downgrade current firmware and see if that helps 
https://static.tp-link.com/upload/beta/2021/202112/20211227/Upgrade_Instruction_KS230(US)1.0_downgrade_to_FW1.0.10.zip
 
Keep me posted
Recommended Solution
  5  
  5  
#9
Options
Re:KS230 Blinks red after firmware update (not working anymore)
2022-01-04 04:16:20
Thanks, @PHATMartz! I was able to use the download you provided to downgrade my KS230 to the previous firmware. Here are some things to note (also listed in the included Word file): - Make sure you turn of your firewall for all network profiles - If you can, disable your antivirus software. My AV was keeping me from using the Scan function on the tool. I had to use the tool on a fresh install of Windows 10 with no AV installed. After I used the Scan function, my computer discovered what seemed like all of my Kasa devices. My KS230 was at the very top. I simply highlighted that line and clicked the Upgrade option. The config file included in the download is configured to supply the previous version of the firmware 1.0.10. The upgrade took about 2 minutes. I'm back in business now!
  2  
  2  
#10
Options
Re:KS230 Blinks red after firmware update (not working anymore)
2022-01-04 05:04:49

@Solla-topee 

 

Thank you very much, the downgrade has fixed my devices.

I am now on 1.0.10 and all is functional.

 

It's funny however, that half of the devices I own work on 1.0.12 and the other half broke, the ones that broke I've returned to 1.0.10 to make functional.

Will Kasa be releasing a future firmware version that corrects this problem, or is it best if I return the broken ones since they don't work on the new firmware?

  0  
  0  
#11
Options

Information

Helpful: 0

Views: 7177

Replies: 15

Related Articles