My H200 hub has two cameras, does each have an IP address?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

My H200 hub has two cameras, does each have an IP address?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
My H200 hub has two cameras, does each have an IP address?
My H200 hub has two cameras, does each have an IP address?
2023-11-26 16:33:19
Model: Tapo C420S2  
Hardware Version:
Firmware Version:

My H200 hub has two C420 cameras, does each have an IP address?

  0      
  0      
#1
Options
6 Reply
Re:My H200 hub has two cameras, does each have an IP address?
2023-11-27 20:33:24

  @NHBob,

I believe that they have an IP address, however, it is assigned by the Hub and not via the router. I do not believe that it is possible to access these IPs through the Hub's connection, and they are simply addresses to help the Hub communicate with the cameras. This is one of the reasons that you cannot access the RTSP / ONVIF stream of the cameras.

  0  
  0  
#2
Options
Re:My H200 hub has two cameras, does each have an IP address?
2023-11-27 21:24:54

  @NHBob Thanks, I found this page How to view Tapo camera on PC through RTSP stream | Tapo

 

So, it seems the battery operated outside cameras can not be accessed remotely, but the $20 C110 can.  I'll be returning these two outdoor cameras.

 

Bob

 

  0  
  0  
#3
Options
Re:My H200 hub has two cameras, does each have an IP address?
2023-12-01 07:11:30 - last edited 2023-12-01 07:17:50

  @NHBob 

The C420 cameras connect directly to the H200 hub using a hidden sub-G 2.4g network. The hub acting as the router. You cannot connect directly to the cameras, or any other devices to the hub.

 

It's a weird setup that uses a proprietary signal, compression to attempt to achieve quality over a longer range outdoors and battery life.Though many users report the range isn't all that great compares to standard cameras that use your existing wi-fi. The battery life on these cameras is extremely impressive as it only connects to the hub when motion is detected or you are actively viewing them. 

 

 

 

 

  1  
  1  
#4
Options
Re:My H200 hub has two cameras, does each have an IP address?
2023-12-01 17:14:54

  @Otrip Thanks for that well written response.

  0  
  0  
#5
Options
Re:My H200 hub has two cameras, does each have an IP address?
2024-01-16 11:42:42

  @Otrip @NHBob 

 

Thank you for this thread, can I confirm if it is possible to connect these C420s to a VIGI NVR?

 

Many thank,

 

  0  
  0  
#6
Options
Re:My H200 hub has two cameras, does each have an IP address?
2024-01-16 20:25:02

  @MCP88,

Unfortunately no, the video feeds do not actually pass through your network as a normal IP camera would.

In fact, most battery-powered cameras will not be compatible with RTSP or ONVIF due to the increased power consumption. This is how these cameras can have extremely long battery lives

To connect any camera to an NVR, you would need one of these two features to be available to the camera.

  1  
  1  
#7
Options

Information

Helpful: 0

Views: 969

Replies: 6

Related Articles