Forums/
Deco
2023-03-22 23:19:35
@Larry099, Definitely a strange behavior... Do you have any of these Deco's behind a networking switch? You may try to bring satellite units offline one by one to see if there is one specific node...
0HELPFULS
Forums/
Adapters
2023-03-22 23:12:25
@N1ghtTheF0x, I would first go through all of the Power Mode Settings on your PC. Oftentimes, the USB ports will have energy-saving modes, or will put the USB port to sleep after a while. It is...
0HELPFULS
Forums/
Wi-Fi Routers
2023-03-22 22:08:21
@bkai, I think that you can eliminate the power source as an issue as this is rarely the case, especially if the router is operating normally. I would double check that you go through the different...
0HELPFULS
Forums/
Deco
2023-03-22 21:13:13
@EdLiving, I would recommend looking at this guide to see where the option to add a deco is: Adding an Additional Deco to an Existing Deco Network You will need to be adding the additional Deco...
1HELPFULS
Forums/
Wi-Fi Routers
2023-03-22 17:13:26
@Amused, The firmware for these two versions is identical, in fact, the firmware files are interchangeable unless otherwise indicated. By default, we list each hardware version separately, even if it...
0HELPFULS
Forums/
Wi-Fi Routers
2023-03-22 16:57:29
@bkai, Have you had the chance to go into your system logs in the WebUI to see if there are any errors being thrown when the disconnects occur? When the dropout occurs, it would be helpful to know...
0HELPFULS