Knowledge Base Integration of VPN Services with Renowned Third-party VPN Providers NordVPN and SurfShark
Feel complicated when setting up VPN client features, especially for WireGuard VPN to connect third-party VPN like NordVPN or Surfshark?
We have fantastic news for you!
Get ready to experience a whole new level of convenience and security with our new feature on our wireless routers (coming soon) and Deco product line.
Integration of VPN Services with Renowned Third-party VPN Providers:
NordVPN and Surfshark
This collaboration brings a rapid VPN configuration experience to our users, enhancing both security and connectivity.
Note: Currently, this feature is only available in the US, It will be gradually rolled out to other regions in the future.
Key Features/Advantages
Seamless Integration
Deco now fully integrates with NordVPN and Surfshark, providing an effortless setup process. Users can directly configure and manage their VPN connections through the Deco interface.
Quick Configuration
With a few simple steps, users can activate their VPN service. This streamlined process eliminates the need for complex configurations, making it accessible even for those with limited technical knowledge.
Enhanced Security
By partnering with NordVPN and Surfshark, Deco offers top-tier encryption and online security. Users can enjoy peace of mind knowing their internet activities are shielded from prying eyes.
Global Connectivity
Access a wide range of global servers and experience internet without borders. Whether for streaming, browsing, or secure communication, users can enjoy unrestricted and speedy access to the web.
User-Friendly Interface
The Deco app provides an intuitive and user-friendly interface, making VPN management straightforward. Users can easily switch between servers, adjust settings, and monitor their connection status.
Reliable Customer Support
In collaboration with NordVPN and Surfshark, Deco offers robust customer support. Users can reach out for assistance with setup, troubleshooting, and tips for optimal VPN usage.
Comparison of Rapid and Manual VPN Configuration
Questions & Answers
1. Which model support this feature for now?
For now, these Deco models support this feature: Deco X95, Deco X50, Deco W3600 V2, Deco X20 V4, Deco X75, Deco X55, Deco X68 V2, Deco X25V3/V4, Deco BE85, Deco BE95, Deco XE75 Pro, Deco XE200, Deco WE10800 V2/V2.6, Deco X4300 Pro, Deco X5000, Deco W6000, Deco X50-Outdoor, Deco XE5300, Deco W7200 V2/V2.6, Deco X5400 Pro, Deco X90, Deco XE75, Deco X60 V3/V4.
Notes:
1. The availability of Rapid VPN Configuration may vary by region even for the same model. Please check your local website for more information.
2. The above list might not include all models and hardware versions. It is recommended to keep watching the firmware releases for your Deco or router.
3) The Deco products doesn't support WireGuard for now, WireGuard VPN will be available soon on those Deco products.
4) For wireless router, there is a beta firmware for Archer AX55 V1 supporting it: [Closed] Public Beta for Archer AX55 V1 Supports EasyMesh Ethernet Backhaul, DoH&DoT, ECO Mode etc. the official firmware will be available soon.
2. How to subscribe this service in other region(except US region)?
We will release this feature in other regions in the future. While even though rapid VPN configuration is not supported, you could still manually configure services from Nord and Surfshark.
3. How to connect other third-party VPN service provider except for NordVPN and SurfShark?
For other third-party VPN providers, you are always able to use the manual VPN configuration.
Additionally, we are expanding our list of partners.
Related Articles
Introduction and Configuration Guide of VPN Function on TP-Link Wireless Routers
Wi-Fi Routers that are Planned to support WireGuard VPN
VPN Server Doesn't Work Properly on TP-Link Wi-Fi Routers
Manually create the unified format for OpenVPN profile when connecting to CyberGhost OpenVPN Server
What can I do if VPN Client is not working?
-------------------------------------------------
Have other off-topic issues to report?
Welcome to > Start a New Thread < and elaborate on the issue for assistance.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
To test the client part of the router settings, adaptive layout and mobile application, it is enough to load one tester with work for no more than a month. You can not give the firmware assembly for a year. And this despite the fact that the router is one of the top products for B2C.
Beta testing on users is not respect for customers, so don't expect respect for yourself. If you continue to behave in relation to customers in this way, you will feel it on your own sales figures.
- Copy Link
- Report Inappropriate Content
Hi.
The problem as you said is during netflix streaming. It looks like there is something that webOS doesnt like. Im loking to find another device running on webOS to test it further. I wonder if there is a firmware version that allows traffic monitoring within the network(something like wireshark or just debugging mode?) So i cann see on a packet level whats going on.
- Copy Link
- Report Inappropriate Content
Maciej wrote
Aside from the 5 GHz problem and it becoming impossible to downgrade the firmware, version 1.3.0 also weakens the connection of 2.4 GHz devices.
For example my printer, which hitherto had a stable connection of around 65 Mbps on various firmwares, now has this (or less):
As I see your printer is 2.4Ghz. Maybe it is not obvious to some people but if You have USB 3 device attached to the port at your router then you should definitely check if it is a shielded device. Many USB 3 devices are causing a lot of interference in the 2.4 GHz band. Those devices should be shielded or connected through a shielded cable.
- Copy Link
- Report Inappropriate Content
Thanks for your input.
I have heard of the shielding issue, but the problem happened whether I had anything connected to the USB ports or not.
In any case, this all went away with version 1.3.0 Build 20220517 rel.55480(4555) of the firmware from 18 May.
Cheers
- Copy Link
- Report Inappropriate Content
Sepharine wrote
Something is terribly wrong with the beta FW for the AX11000.
The strange symptoms i encounter is either when i use torguard or airvpn.
See picture:
This is a dutch webshop, this error appears on a Dutch VPN IP either on Torguard and AirVPN when i use a system wide NL VPN from the AX11000.
When is use the same IP from a windows pc i encounter no issues.
The openvpn version in the FW seems to be 2.4.11 while the current version is 2.5.7.
Any thoughts about this?
@Sepharine That's really weird. To assist and figure it out efficiently, I've forwarded your case to the TP-Link support engineers who will contact you with your registered email address later. Please pay attention to your email box for follow-up. Thank you.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Neytview wrote
When do you expect the firmware version v2 with vpn client function to be available?
@Neytview Are you referring to Archer AX11000 V2.0? As confirmed with the R & D engineers previously, the new firmware for AX11000 V2.0 is under development, and it will be available soon. Please keep an eye on the router web GUI or the TP-Link website for any updates.
- Copy Link
- Report Inappropriate Content
Just a heads up...
For the past year or so, ever since the introduction of OneMesh for the AX11000 v1, I've successfully used two RE550 range extenders with the router in OneMesh mode exactly.
Now, however, on Beta firmware 1.3.0 Build 20220517 rel.55480(4555), both RE550s totally lose connection within a couple of days, and the only resolution is a reset, which is bothersome.
Since both units are experiencing the same problem, everything seems to point to the firmware.
My workaround has been to use two RE600Xs (excellent!) in OneMesh and one RE550 in AP mode, this way it doesn't get lost.
- Copy Link
- Report Inappropriate Content
Maciej wrote
Just a heads up...
For the past year or so, ever since the introduction of OneMesh for the AX11000 v1, I've successfully used two RE550 range extenders with the router in OneMesh mode exactly.
Now, however, on Beta firmware 1.3.0 Build 20220517 rel.55480(4555), both RE550s totally lose connection within a couple of days, and the only resolution is a reset, which is bothersome.
Since both units are experiencing the same problem, everything seems to point to the firmware.
My workaround has been to use two RE600Xs (excellent!) in OneMesh and one RE550 in AP mode, this way it doesn't get lost.
@Maciej Thank you for reporting the extender connection issue with the AX11000, I would certainly report this to the engineers and ask them to confirm. You can also report this feedback to them via email. Thanks.
- Copy Link
- Report Inappropriate Content
I've done as you instructed.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 14
Views: 220599
Replies: 345
Voters 9
